PowerStop L4911 front right brake caliper for the 2004-2008 Chevrolet Malibu and other vehicles presses the pads against the rotor to slow the wheel. This floating caliper bolts on in place of the original stock caliper with no modifications.
- Autospecialty by PowerStop line of replacement brake calipers
- Floating design with a single steel piston
- New seals, guide pins, dust boots, a bleeder screw and stainless-steel abutment hardware clips fitted at assembly
- High temperature EPDM rubber dust boots
- Assembly lubricant for smooth caliper operation
- 100% pressure tested and inspected
Quick facts
- Part: PowerStop L4911 brake caliper
- Also called: disc brake caliper
- Fits: 2004-2008 Chevrolet Malibu and other vehicles
- Position: Front right
- Material: Cast iron
- Condition: New
A disc brake caliper that sticks or leaks can show up as the vehicle pulling to one side under braking, a burning smell after driving, or fluid around the caliper. Before you replace this caliper, rule out worn pads, a damaged brake hose or a stuck guide pin as the cause.
Fits
This is a brake caliper for the 2004-2008 Chevy Malibu, the 2006-2011 Chevrolet HHR and the 2006-2007 Pontiac G6. This listing is one caliper, sold individually; the 2004-2008 Chevrolet Malibu takes one on the front right, while the front left on that axle is a separate part and is normally replaced at the same time.
Specifications
Fit and size
- Position: Front right
- Quantity per vehicle: 1
- Piston diameter: 60.20 mm
- Piston quantity: 1
Build and materials
- Caliper type: Floating, with caliper slides included
- Piston material: Steel
- Caliper casting material: Cast iron
- Integrated parking brake: No
- Condition: New
- Country of origin: China
In the box
One front right brake caliper, assembled with new seals, guide pins, dust boots and a bleeder screw. Brake pads, a mounting bracket, mounting bolts and caliper grease are not included, so plan on new mounting bolts.
Frequently Asked Questions
Is this a Pontiac G6 brake caliper for the 2006-2007 model years?
Yes. PowerStop L4911 fits the front right side of the 2006-2007 Pontiac G6. The front left on that axle takes its own caliper.
Is this an HHR brake caliper for the 2006-2011 model years?
Yes. This front right caliper fits the 2006-2011 Chevrolet HHR. The front left side needs its own caliper, ordered separately.
Do PowerStop brake calipers come with new seals and guide pins?
Yes. The PowerStop L4911 is assembled with new seals, guide pins, dust boots and a bleeder screw. Brake pads, a mounting bracket, mounting bolts and caliper grease are not included.
What size piston does this floating caliper have?
The PowerStop L4911 has one steel piston, 60.20 mm in diameter. The caliper body is cast iron.
Can I keep driving with a sticking front right caliper?
No. Have it checked or replaced promptly, because a sticking caliper affects braking. A shop can test the caliper and brake hose for you.
