PowerStop L5004 front left brake caliper for the 2009-2017 Chevrolet Traverse and other vehicles clamps the brake pads against the rotor to slow the wheel. PowerStop brake calipers like this floating, two-piston disc brake caliper bolt on in place of the original stock caliper without modifications.
- Autospecialty by PowerStop line, a replacement caliper for DIY and professional installers
- 100% pressure tested and inspected
- New seals, guide pins, dust boots and a bleeder screw
- High temperature EPDM rubber dust boots
- Phenolic pistons, 48.01 mm in diameter
Quick facts
- Part: PowerStop L5004 brake caliper
- Also called: disc brake caliper
- Fits: 2009-2017 Chevrolet Traverse and other vehicles
- Position: Front left
- Material: Cast iron
- Condition: New
Pulling to one side under braking, or brake fluid around the caliper, can mean this caliper is sticking or leaking, though a worn brake hose or the rotor can be behind the same signs, so find the cause before you replace it.
Fits
Listed for a wide range of models from Chevrolet, GMC, Buick and other makes, it fits the 2009-2017 Chevrolet Traverse, the 2007-2016 GMC Acadia and the 2008-2017 Buick Enclave. If your car is not named here, look it up in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: front left
- Quantity per vehicle: 1 for this side
- Piston quantity: 2
- Piston diameter: 48.01 mm
Build and materials
- Type: floating caliper, no integrated parking brake
- Caliper body material: cast iron
- Piston material: phenolic
- Dust boots: high temperature EPDM rubber
- Caliper slides: included
- Condition: new
- Country of origin: China
In the box
One front left brake caliper with its guide pins and a bleeder screw. Brake pads, mounting bracket, mounting hardware, mounting bolts, pad wear sensor and caliper grease are not included, so plan on new mounting bolts, since the old ones may not be reusable. This listing is one caliper for the front left, which takes one; the front right is a separate part ordered separately, and both sides are normally replaced together.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is this front left brake caliper the right one for the 2007-2016 GMC Acadia?
Yes. The PowerStop L5004 is a front left caliper listed for the 2007-2016 GMC Acadia. The front right side is a separate part.
Does this front left caliper come with brake pads and a mounting bracket?
No. This caliper comes with its guide pins and a bleeder screw, but not brake pads, mounting bracket, mounting hardware, mounting bolts or caliper grease.
What are the pistons in the L5004 caliper made of?
The PowerStop L5004 has two phenolic pistons with a 48.01 mm piston diameter, in a floating caliper with a cast iron body.
What material are the dust boots on this caliper?
The dust boots are high temperature EPDM rubber. The caliper is also supplied with new seals and guide pins.
Does the PowerStop L5004 need any modifications to install?
No. The PowerStop L5004 is made to bolt on in place of the original stock caliper with no modifications necessary.
