PowerStop Disc Brake Rotor P/N:AR8396EVC
PowerStop AR8283EVC front brake rotor for the 2005-2006 Pontiac GTO is the vented disc the pads clamp to slow the car. This PowerStop brake rotor is a direct bolt-on replacement for factory equipment, and it needs no modifications. It is manufactured to original equipment specifications for fitment, weight, vane count and performance.
Grooves, a pulsing brake pedal or vibration under braking can mean a worn disc brake rotor. Worn pads or a sticking caliper can be behind those signs too, so find the cause before you buy. This listing is one rotor, and both sides of the axle are normally replaced together.
These are brake rotors for the 2005-2006 Pontiac GTO, which takes one on each side of the front axle.
Fit and size
Build and materials
Product information is for general reference and may contain errors. See our Disclaimer.
Do these PowerStop front rotors fit the 2005-2006 Pontiac GTO?
Yes. The PowerStop AR8283EVC is a front rotor for the 2005-2006 Pontiac GTO, and it bolts on without modifications.
What size is the PowerStop AR8283EVC rotor?
It is 320 mm (12.60 in) across and 32 mm thick, with a 120 mm bolt circle and 5 lug holes. The body is vented and full cast.
Does this front rotor come with an ABS tone ring?
No. The ABS tone ring is not included with the PowerStop AR8283EVC front rotor.
How thin can this vented rotor get before it needs replacing?
The discard thickness is 30 mm, against 32 mm when new. A rotor measured down to that thickness is due for replacement.
What does the GEOMET 360 coating cover on these rotors?
The rotor is fully coated with Genuine GEOMET 360, a thin layer that protects against rust and corrosion without influencing braking performance.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.