PowerStop AR8924EVC rear brake rotor for the 2011-2019 Ford F-53 Motorhome Chassis and other vehicles is the vented disc the brake pads clamp against to slow the wheel. This PowerStop brake rotor is a direct bolt-on replacement for factory equipment, with no modifications necessary.
- PowerStop Evolution Coated line: fully coated with Genuine GEOMET 360 to protect against rust and corrosion
- Thin GEOMET 360 layer that does not influence braking performance
- Strict tolerances for DTV and runout for smooth, quiet performance
- Weight and vane count made to specification for fit and performance
- 100% dynamic mill balanced
Quick facts
- Part: PowerStop AR8924EVC brake rotor
- Also called: disc brake rotor
- Fits: 2011-2019 Ford F-53 Motorhome Chassis and other vehicles
- Position: Rear
- Condition: New
A worn disc brake rotor can show up as pedal pulsation, a grinding or squealing noise, or grooves you can see on the rotor face. Before you replace this rotor, rule out a sticking caliper, worn pads or a loose wheel, since each of those can produce similar vibration.
Fits
Aside from the 2011-2019 Ford F-53 Motorhome Chassis, this rear brake rotor suits the 2015-2019 Ford F-59 Commercial Stripped Chassis and the 2002-2004 Ford F-450 Super Duty, and these vehicles take two rear rotors. This listing is one rotor, so the other rear rotor on that axle is normally replaced at the same time. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 2
- Outside diameter: 395.0 mm (15.6 in)
- Bolt circle: 163.3 mm (6.4 in), 10 lug holes
- Nominal thickness: 38.1 mm (1.5 in)
- Discard thickness: 36.1 mm (1.4 in)
- Overall height: 123.7 mm (4.9 in)
Build and materials
- Type: Vented, full cast
- Surface: Smooth
- Coating: Genuine GEOMET 360 rust-resistant coating
- Balance: 100% dynamic mill balanced
- ABS tone ring: not included
- Condition: New
- Country of origin: China
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Does the PowerStop AR8924EVC fit the 2015-2019 Ford F-59 Commercial Stripped Chassis?
Yes. PowerStop AR8924EVC is listed for the 2015-2019 Ford F-59 Commercial Stripped Chassis. Open the "Vehicles it fits" section to check your exact model and engine.
Are PowerStop Evolution Coated rotors fully coated?
Yes. This rotor is fully coated with Genuine GEOMET 360, a thin layer that protects against rust and corrosion without influencing braking performance.
Does this rear rotor come with the ABS tone ring?
No. The ABS tone ring is not included with PowerStop AR8924EVC; this listing is the rotor only.
How thin can this rotor wear before it needs replacing?
The discard thickness is 36.1 mm (1.4 in), against a new thickness of 38.1 mm (1.5 in). A rotor measured at or below the discard thickness is due for replacement.
Is this rotor vented or solid, and how many lug holes does it have?
It is vented, with full-cast construction and a smooth surface. It has 10 lug holes on a 163.3 mm (6.4 in) bolt circle.
