Standard Ignition ALS3180 front ABS wheel speed sensor for the 2011-2021 Nissan Leaf reports wheel speed to the ABS. It is engineered specifically for Nissan vehicles.
- Synthetic material construction made to withstand harsh operating conditions
- Sealed connector for protection in harsh conditions
- Vehicle-tested for correct integration with electronic safety systems
- Engineered for precision performance and a long service life
Quick facts
- Part: Standard Ignition ALS3180 ABS wheel speed sensor
- Fits: 2011-2021 Nissan Leaf
- Position: Front
- Material: Synthetic material
A failing wheel speed sensor can show up as an ABS or traction control warning light, or as ABS that acts up. Before you replace it, rule out damaged wiring and a loose or corroded connector, since each of those can also set the light; a shop can scan the codes to tell which.
Fits
It fits the 2011-2021 Nissan Leaf, which takes two; this listing is one front sensor.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 2
- Mounting: bolt mount, 1 bolt hole, at the wheel
- Connector: 1 rectangular female connector
- Terminals: 2 male pins
Build and materials
- Material: synthetic material
- Connector: sealed
- Country of origin: Thailand
In the box
One ABS wheel speed sensor with its harness. A dust shield and mounting hardware are not included, so plan on a new mounting bolt.
Installation notes
- Grommets and wire clips come on the harness in the OE locations to help with mounting and routing, which saves technicians time.
Interchange: ABS3180 · ABSB10533 · 533551 · 479103NA0A · 479103NA1A · 479103NA2A
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
ABS3180, ABSB10533, 533551, 479103NA0A, 479103NA1A, 479103NA2A, ALS3180
Frequently Asked Questions
Is the Standard Ignition ALS3180 the right front ABS sensor for the 2011-2021 Nissan Leaf?
Yes. Standard Ignition ALS3180 is a front wheel speed sensor listed for the 2011-2021 Nissan Leaf, which takes two.
Does the ALS3180 ABS sensor come with a mounting bolt?
No. Mounting hardware and a dust shield are not included; the sensor comes with its harness, which carries grommets and wire clips.
What kind of connector does the Standard Ignition ALS3180 use?
The Standard Ignition ALS3180 has one rectangular female connector with two male pin terminals. The connector is sealed for protection in harsh conditions.
How can I tell if a front ABS wheel speed sensor is failing?
Common signs include an ABS or traction control warning light. With the engine off, you can look for a cracked or damaged wire; a shop can scan the codes for a fault.
What is the ALS3180 ABS sensor made of?
It is built from synthetic material made to withstand harsh operating conditions.
