Standard Ignition APS213 accelerator pedal sensor for the 2010-2011 Saab 9-3 and other vehicles reports pedal position to the engine control unit.
- End-of-line testing of each sensor, with thousands of data points validating output voltages
- Supplied as a complete pedal assembly
- Female plug-in connector with six male blade terminals
- Floor-mounted pedal that attaches with bolts
Quick facts
- Part: Standard Ignition APS213 accelerator pedal sensor
- Fits: the 2010-2011 Saab 9-3 and other vehicles
- Material: Polyamide 6
- Condition: New
Hesitation, uneven throttle response or a warning light can mean the sensor is wearing out. These signs alone do not prove the sensor is the problem; wiring or a loose connector is another common cause. The car takes one sensor, and this listing is one.
Fits
This accelerator pedal sensor fits the 2004-2005 Saab 9-3, the 2010-2011 Saab 9-3 and the 2010-2011 Saab 9-3X. Its installed outputs are set to match OE rather than an adjustable consolidated design.
Specifications
Fit and size
- Quantity per vehicle: 1
- Mounting location: floor mounted
- Attachment method: bolt on
- Connector: 1, rectangular, female, plug in
- Terminals: 6, male, blade
Build and materials
- Type: complete pedal assembly
- Material: Polyamide 6
- Condition: New
- Country of origin: Germany
In the box
One accelerator pedal sensor as a complete pedal assembly. A mounting bracket and mounting hardware are not included, and no linkage is attached, so plan on new bolts because the old ones may not be reusable.
Interchange: 2-80112
PPS1112 · PPSB10179 · 9186724 · 93174339
This part cross-references / interchanges with the following part numbers:
PPS1112, PPSB10179, 2-80112, 9186724, 93174339, APS213
Frequently Asked Questions
Is this the right sensor for the 2010-2011 Saab 9-3?
Yes. Standard Ignition APS213 is listed for the 2010-2011 Saab 9-3 and the 2010-2011 Saab 9-3X.
Does the APS213 come as a complete pedal assembly with a bracket?
It comes as a complete pedal assembly. A mounting bracket and mounting hardware are not included, and no linkage is attached.
How many terminals does the Standard Ignition APS213 connector have?
Standard Ignition APS213 has a rectangular, female plug-in connector with six male blade terminals.
How can I tell if an accelerator pedal sensor is going bad?
Hesitation, uneven throttle response or a warning light can be signs of a worn sensor. A shop can test the sensor's output voltage with the right equipment.
How is each Standard Ignition APS213 accelerator pedal sensor tested?
Each sensor goes through end-of-line testing with thousands of data points that validate its output voltages.
