Standard Ignition DWS1836 left door lock switch for the 2011-2014 Dodge Challenger operates the power windows and includes lock and unlock control.
- Copper alloy conductors for electrical conductivity with low resistive losses
- Testing verifies both mechanical and electrical switching performance
- Three switches, with auto up/down on the driver window and lock/unlock control included
- Rectangular connector with 12 pin terminals
- Plastic body
Quick facts
- Part: Standard Ignition DWS1836 door lock switch
- Fits: 2011-2014 Dodge Challenger
- Position: Left
- Material: Plastic
- Condition: New
Windows that respond only some of the time, or lock and unlock buttons that go dead, can mean the switch contacts are worn. Before you replace this switch, rule out a blown fuse, a loose connector and a fault in the window motor or lock actuator, since those look much the same at the door.
Fits
Also listed as a power window switch, it fits the left side of the 2011-2014 Dodge Challenger and is specifically designed for Chrysler vehicles.
Specifications
Fit and size
- Position: Left
- Quantity per vehicle: 1
- Connector: rectangular, 1 connector
- Terminals: 12, pin type, male
- Voltage: 12V
Build and materials
- Material: Plastic
- Number of switches: 3
- Auto up/down: driver window
- Lock/unlock: included
- Illuminated: No
- Condition: New
- Country of origin: China
In the box
One left door lock switch; the 2011-2014 Dodge Challenger takes one on this side, and the right side is ordered separately. The wiring harness and mounting hardware are not included, so plan on new fasteners if your door needs any.
Installation notes
- Attaches with a snap fit.
- Engineered as an OE replacement for simplified installation.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is the Standard Ignition DWS1836 the left switch for the 2011-2014 Dodge Challenger?
Yes. Standard Ignition DWS1836 is a left-side door lock switch for the 2011-2014 Dodge Challenger, which takes one on this side.
Does the DWS1836 switch come with a wiring harness or mounting hardware?
No. This Standard Ignition DWS1836 listing is one switch only. The wiring harness and mounting hardware are not included.
How many terminals does this door lock switch connector have?
The rectangular connector has 12 male pin terminals, and the switch runs on 12V.
Does this switch have auto up/down and lock/unlock control?
Yes. It has three switches, with auto up/down on the driver window, and lock/unlock control is included. It is not illuminated.
How does this left door lock switch attach to the door?
It attaches with a snap fit. It is engineered as an OE replacement to simplify installation.
