Standard Ignition Engine Coolant Temperature Sender P/N:TS-563
$27.99
(You save)
Keep an accurate read on engine temperature with the Standard Ignition Engine Coolant Temperature Sender TS-563. This sender threads into the cooling system and monitors coolant temperature, sending a signal to the dash gauge (and/or engine management) so you can track how hot the engine is running. It's a direct-fit replacement for the 1984-1988 Mercedes-Benz 190E and the 1991 Mercedes-Benz 190E.
Function: Measures engine coolant temperature and converts it to an electrical signal for the temperature gauge/circuit.
Direct fit: Designed to install in place of the original sender on the listed applications.
Signs it may need replacing: An erratic, stuck, or inaccurate temperature reading, or a gauge that no longer responds. If a faulty sender is the cause, this part replaces it — diagnose the circuit first, since wiring or the gauge can produce similar symptoms.
Interchange: WT730 · TS6132 · 0065459024. Manufacturer part number TS-563.
Note the two separate application spans for the Mercedes-Benz 190E: 1984-1988 and 1991. Check the Buyer's Guide tab to confirm this sender matches your vehicle.
This part cross-references / interchanges with the following part numbers:
WT730, TS6132, 0065459024, TS-563
Frequently Asked Questions
What does this coolant temperature sender do?
It measures engine coolant temperature and sends an electrical signal to the temperature gauge and/or engine management circuit so you can monitor how hot the engine is running.
Which vehicles does the TS-563 fit?
It's a direct-fit replacement for the 1984-1988 Mercedes-Benz 190E and the 1991 Mercedes-Benz 190E. Confirm your application in the Buyer's Guide tab.
Does it fit the 1989 or 1990 190E?
The listed applications are the 1984-1988 190E and the 1991 190E only. Those are two separate spans, so check the Buyer's Guide before ordering for other years.
What numbers does this part interchange with?
It cross-references WT730, TS6132, and 0065459024. The manufacturer part number is TS-563.
What are signs this sender may need replacing?
An erratic, stuck, or inaccurate temperature reading, or an unresponsive gauge. Diagnose the wiring and gauge first, since they can cause similar symptoms.
Write a Review
STANDARD MOTOR PRODUCTS
Standard Ignition Engine Coolant Temperature Sender P/N:TS-563
Keep a clear, accurate read on engine temperature with the Standard Ignition Engine Coolant Temperature Sender TS-362. This "with gauge" sender is a direct-fit replacement across a range of...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
