Standard Ignition Engine Coolant Temperature Sender P/N:TS-286
$30.99
(You save)
Keep tabs on how hot your engine is running with the Standard Ignition Engine Coolant Temperature Sender TS-286. It fits as a direct-fit replacement for the listed applications: the 1989-1991 Peugeot 405, the 1983 Peugeot 504, the 1982-1991 Peugeot 505, and the 1982-1984 Peugeot 604.
A coolant temperature sender reads the temperature of the engine coolant and sends that signal on to the temperature gauge and/or control system, so the reading you see reflects what the coolant is actually doing.
Monitors coolant temperature: senses engine coolant temperature and passes the signal along for gauge and system use.
Direct-fit design: made to install on the listed Peugeot applications.
Signs it may need replacing: an inaccurate, stuck, or dead temperature gauge, or erratic readings. If a failed sender is the cause of these symptoms, this replaces it—diagnose the cause first, as other components can produce similar signs.
Interchange: WT620 · TU376 · TS6077 · 133772 · 133802. Manufacturer part number TS-286 (also TS286).
This part cross-references / interchanges with the following part numbers:
WT620, TU376, TS6077, 133772, 133802, TS-286
Frequently Asked Questions
What does this coolant temperature sender do?
It senses the temperature of the engine coolant and sends that signal to the temperature gauge and/or control system so the reading reflects actual coolant temperature.
Which vehicles does the TS-286 fit?
It's a direct-fit replacement for the 1989-1991 Peugeot 405, 1983 Peugeot 504, 1982-1991 Peugeot 505, and 1982-1984 Peugeot 604. Check the Buyer's Guide tab to confirm your vehicle.
What are the signs this sender may need replacing?
An inaccurate, stuck, or dead temperature gauge, or erratic readings. These signs can have other causes, so diagnose before replacing.
What numbers does this part interchange with?
It cross-references WT620, TU376, TS6077, 133772, and 133802. Its own manufacturer part number is TS-286.
Will replacing this fix my temperature gauge?
If a failed sender is the cause of the gauge problem, this part replaces it. Because wiring, the gauge, or the thermostat can cause similar symptoms, confirm the sender is at fault first.
Write a Review
STANDARD MOTOR PRODUCTS
Standard Ignition Engine Coolant Temperature Sender P/N:TS-286
Keep an accurate read on engine temperature with the Standard Ignition Engine Coolant Temperature Sender TS-89. It installs as a direct-fit replacement for the listed applications: the 1980-1983 Audi...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
