Standard Ignition Headlight Dimmer Switch Connector,Headlight Switch Connector P/N:S-760
Repair a cracked, corroded or heat-damaged switch plug with the Standard Ignition switch connector S-1399. It is listed as a Headlight Switch Connector, Traction Control Switch Connector and Fog Lamp Switch Connector. It is a direct-fit replacement for many vehicles, among them the 2003-2013 Chevrolet Silverado 1500 and 2003-2013 GMC Sierra 1500.
The connector pushes onto the switch and joins it to the vehicle's wiring through a five-wire pigtail. It is cataloged for the front position.
Signs this connector may need replacing: a melted, cracked or corroded connector, loose terminals, or damaged wires at the switch plug. Diagnose the circuit first. If the connector is the cause of an intermittent headlight, fog lamp or traction control switch circuit, splicing in this pigtail replaces it.
It fits a wide range of Buick, Cadillac, Chevrolet, GMC, Hummer, Isuzu, Oldsmobile and other models with all engines, using one connector per application. See the Buyer's Guide tab for the full list.
Interchange: PT898 · 1011 · EC897 · 12059800 · 15306169
This part cross-references / interchanges with the following part numbers:
What does the Standard Ignition S-1399 connector plug into?
It is the wiring connector for a switch. It is listed as a headlight switch, traction control switch and fog lamp switch connector, and it joins that switch to the vehicle's harness on the listed applications.
What is included in the package?
One factory-assembled connector with a wiring harness pigtail and five butt-splice connectors. A dust shield is not included.
How does the S-1399 install?
The connector pushes onto the switch, and its pigtail is spliced into the existing wiring with the included butt splices. Follow your vehicle's service information for the repair.
Does it fit my 2003-2013 Chevrolet Silverado 1500?
Yes, it is listed for the 2003-2013 Chevrolet Silverado 1500 with all engines. Check the Buyer's Guide tab to confirm your exact vehicle.
What are signs the switch connector may need replacing?
Signs include a melted, cracked or corroded housing, loose terminals, or damaged wires at the plug. Diagnose the circuit first; if the connector is the cause, this part replaces it.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.