Standard Ignition UF-135 ignition coil for the 1991-1992 Porsche 911 H6 3.3L turns battery voltage into the high voltage a spark plug needs to fire. This Standard Ignition coil is an electronic, oil-filled unit that bolts on with its bracket.
- Full E-Lam core of silicon steel
- Solid brass high voltage terminals that protect against corrosion
- 100% pure copper windings in the primary and secondary bobbins for durability and resistance to internal shorts and dielectric breakdown
- Special blended formula that aids heat dissipation
- Primary and secondary windings of enamel magnet wire for a high temperature rating
Quick facts
- Part: Standard Ignition UF-135 ignition coil
- Fits: 1991-1992 Porsche 911 H6 3.3L and 1994 Porsche 911 H6 3.6L
- Condition: New
Hard starting, a misfire or a rough idle can mean the coil is weak, though worn spark plugs or damaged ignition wiring can also be behind them, so find the cause before you replace it. Either engine takes one coil.
Fits
This ignition coil fits the 1991-1992 Porsche 911 H6 3.3L and the 1994 911 H6 3.6L.
Specifications
Fit and size
- Voltage: 12 V
- Quantity per vehicle: 1
- Terminal quantity: 2
- Connector quantity: 2
Build and materials
- Ignition type: oil filled
- Mount type: bolt on
- Terminal type: screw, male
- Connector gender: male
- Mounting bracket: included
- Condition: New
- Country of origin: Germany
In the box
One ignition coil with its mounting bracket. Mounting hardware is not included, so plan on new fasteners, since the old ones may not be reusable.
Interchange: 09660211600 · E664 · 0221501428 · 221501428 · C1494 · IC229 · 96560211600
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
09660211600, E664, 0221501428, 221501428, C1494, IC229, 96560211600, UF-135
Frequently Asked Questions
Is this Porsche 911 coil made for both the 1991-1992 H6 3.3L and the 1994 H6 3.6L?
Yes. Standard Ignition UF-135 fits the 1991-1992 Porsche 911 H6 3.3L and the 1994 911 H6 3.6L.
Does this oil-filled coil include its mounting bracket and bolts?
The mounting bracket is included, but mounting hardware is not, so you need to supply the fasteners.
What voltage and terminal type does the UF-135 coil use?
Standard Ignition UF-135 is a 12-volt coil with two male screw-type terminals and two male connectors.
How can I tell if this ignition coil is going bad?
Hard starting, a misfire or a rough idle can mean a weak coil. With the engine off and cool, you can look for cracks or oil leaks on the coil body, and a shop can test its output.
What are the windings in this ignition coil made of?
The bobbins use 100% pure copper windings, and the primary and secondary windings are enamel magnet wire. The core is a full E-Lam core of silicon steel.
