Keep the ignition in your classic FIAT firing on cue with the Standard Ignition Contact Set MA-3467. This set of breaker points is a direct-fit replacement for the 1957-1961 FIAT 500, the 1961 FIAT 600 and the 1963-1966 FIAT 600D. See the "Vehicles it fits" section for engine details. Inside the distributor, the points open and close as the cam turns. This switches the ignition coil's primary circuit to trigger each spark.
- Lubricated felt pad: oils the cam lobes on the distributor. This reduces wear on the point set's rubbing block and extends the part's usable life.
- Pre-aligned and pre-adjusted: each unit comes set up to save installation time and support proper switching.
- Copper-alloy shunt: resists breakage from the flexing of the point set's moving arm. It also conducts current significantly better than typical steel shunts.
- Tungsten contacts: designed to run cooler and show less erosion.
Standard Ignition has served the automotive aftermarket since 1919. As a global maker of original equipment ignition products, it maintains quality control throughout manufacturing, from components to the finished product.
Signs this part may need replacing: hard starting, misfiring or rough running, burned or pitted contact surfaces, or a points gap that has closed up as the rubbing block wears. Other ignition components can cause similar symptoms, so diagnose the cause before replacing.
Interchange: 19190649 · A512 · 1217999005 · IGNA88 · CS225 · 9903322 · 9903324 · 9903325 · 9908331 · 9909412 · 12301060 · 12323518 · 70412101 · 74327573 · A9101202 · A91012022 · A9101231 · MI2819 · MI2821 · MI2822
This part cross-references / interchanges with the following part numbers:
19190649, A512, 1217999005, IGNA88, CS225, 9903322, 9903324, 9903325, 9908331, 9909412, 12301060, 12323518, 70412101, 74327573, A9101202, A91012022, A9101231, MI2819, MI2821, MI2822
Frequently Asked Questions
Which vehicles does the Standard Ignition MA-3467 fit?
It is listed for the 1957-1961 FIAT 500, the 1961 FIAT 600 and the 1963-1966 FIAT 600D. See the "Vehicles it fits" section for engine details.
What does a contact set do?
The points open and close as the distributor cam turns. This switches the ignition coil's primary circuit so the coil can fire each spark plug.
Does the MA-3467 need adjusting out of the box?
The unit comes pre-aligned and pre-adjusted to save installation time. After installing, check the points gap and dwell against your vehicle's service information.
What is the felt pad for?
The lubricated felt pad oils the distributor's cam lobes. This reduces wear on the rubbing block and helps extend the contact set's usable life.
What part numbers does the MA-3467 replace?
It interchanges with numbers including 19190649, A512, 1217999005, IGNA88 and CS225. See the Interchange line in the description for the complete list.
