Standard Ignition PAC237 rear park assist camera for the 2017-2020 BMW 430i and other vehicles gives the driver a view behind the vehicle while parking.
- Plug-and-play design, so no programming is required
- Single female plug connector with four male pin terminals
- Extensive testing and validation for proper performance and reliability
Quick facts
- Part: Standard Ignition PAC237 park assist camera
- Fits: 2017-2020 BMW 430i and other vehicles
- Position: Rear
- Condition: New
A blank, distorted or missing rear image can mean the camera has failed, though a fault in the display, wiring or connector can look identical. With the engine off, look over the lens for cracks, moisture or damage and the plug for bent pins or corrosion before you replace the camera.
Fits
This park assist camera is a direct-fit OE replacement for the 2017-2020 BMW 430i, the 2017-2020 BMW 430i xDrive and the 2017-2020 BMW 430i xDrive Gran Coupe, and other vehicles.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 1
- Connector: 1 female plug
- Terminals: 4 male pin terminals
Build and materials
- Condition: New
- Country of origin: Taiwan
In the box
One rear park assist camera; the vehicle takes one. A mounting bracket and a storage case are not included.
Interchange: 864-076
66539191224 · 66539200566 · 66539216283 · 66539240351 · PAN237 · PACA80 · PAW237
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
66539191224, 66539200566, 66539216283, 66539240351, PAN237, PACA80, PAW237, 864-076
Frequently Asked Questions
Does the Standard Ignition PAC237 fit a 2017-2020 BMW 430i xDrive?
Yes, Standard Ignition PAC237 is a rear park assist camera for the 2017-2020 BMW 430i xDrive. If your car is not named here, find its model and years in the "Vehicles it fits" section on this page.
Does the PAC237 rear park assist camera come with a mounting bracket?
No. This listing is one rear park assist camera, and a mounting bracket and a storage case are not included.
What connector does the Standard Ignition PAC237 use?
Standard Ignition PAC237 has one female plug connector with four male pin terminals.
Do I need to program the PAC237 camera after installing it?
No. This park assist camera has a plug-and-play design, so no programming is required.
Is 864-076 a cross-reference for the PAC237 camera?
Yes. The number 864-076 is listed as an interchange for this camera, along with 66539191224 and the other numbers on the Interchange line.
