Standard Ignition Turbocharger P/N:TBC641
Standard Motor Products
Standard Ignition TBC589 turbocharger for the 2007-2016 Mini Cooper 4-cylinder 1.6L and other vehicles uses exhaust flow to push more air into the engine. The turbine side runs on exhaust gas while the compressor side raises the pressure of the intake air.
A worn turbocharger can show up as loss of power, smoke from the exhaust or a whining noise. Before replacing it, look over the intake hoses, clamps and oil feed area for cracks or oil residue with the engine off and cool, since a turbocharger fault is only one possible source of those signs.
It fits the 2007-2016 Mini Cooper 4-cylinder 1.6L, the 2011-2016 Mini Cooper Countryman 4-cylinder 1.6L and the 2013-2016 Mini Cooper Paceman 4-cylinder 1.6L, and it is designed and tested for Mini 1.6L turbocharged engines. A 2011-2016 Mini Cooper Countryman 4-cylinder 1.6L takes one turbocharger, which is what this listing holds.
Fit and size
Build and materials
One turbocharger with its installation kit, which also holds seals. The wastegate actuator, speed sensor, temperature sensor, other sensors, oil supply line, exhaust manifold and exhaust brake are not included.
Product information is for general reference and may contain errors. See our Disclaimer.
Does the Standard Ignition TBC589 turbocharger fit the 2013-2016 Mini Cooper Paceman 4-cylinder 1.6L?
Yes. The Standard Ignition TBC589 is listed for the 2013-2016 Mini Cooper Paceman 4-cylinder 1.6L, and the car takes one turbocharger.
Are the gaskets and bolts included with this Mini turbocharger?
Yes. The installation kit has new fasteners, gaskets and seals, plus the wastegate control solenoid. The oil supply line and exhaust manifold are not included.
Is the wastegate on this turbocharger external or internal?
It is external. This turbocharger has an external wastegate and fixed geometry; the wastegate control solenoid comes with it, but the wastegate actuator does not.
Can I keep driving with a Mini turbocharger that whines or loses power?
No. Have it checked or replaced promptly; a shop can test boost pressure, which needs the engine running.
How was the Standard Ignition TBC589 turbocharger tested?
The Standard Ignition TBC589 is tested in the lab and on vehicles for proper performance and durability. It uses journal and thrust bearings and a cast housing.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.