Standard Ignition VCP147 vacuum pump for the 2012-2019 Fiat 500 and other vehicles maintains vacuum for the brake booster and auxiliary systems. It is tested to OE specifications.
- Belt-driven pump with a metal housing
- Seals designed to prevent leaks and maintain proper vacuum pressure
- 100% pressure tested before it ships
- 5/16 in hose size, with one hose connector and one vacuum port
Quick facts
- Part: Standard Ignition VCP147 vacuum pump
- Fits: 2012-2019 Fiat 500 and other vehicles
- Material: Metal housing
- Condition: New
A hard brake pedal or weaker brake assist can be a sign of low vacuum. A leaking vacuum hose is another common source of low vacuum, so these signs alone do not prove the pump is at fault. If brake feel changes, have it looked at promptly.
Fits
It is a direct-fit OE replacement, listed for a wide range of Fiat, Jeep and Dodge models, including the 2012-2019 Fiat 500, the 2014-2019 Fiat 500L and the 2015-2018 Jeep Renegade. The 2012-2019 Fiat 500 takes one pump. To check your exact model and engine, open the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 1
- Hose size: 5/16 in
- Inlet size: 0.21 in (5.334 mm)
- Hose connector quantity: 1
- Vacuum port quantity: 1
Build and materials
- Drive system: belt
- Housing material: metal
- Condition: new
- Country of origin: China
In the box
One vacuum pump with a gasket and a mounting bracket. The pulley, mounting hardware, O-rings and relief valve are not included, so plan on new fasteners rather than reusing old ones.
Frequently Asked Questions
Is the Standard Ignition VCP147 a vacuum pump for the 2012-2019 Fiat 500?
Yes. Standard Ignition VCP147 is listed for the 2012-2019 Fiat 500, which takes one pump. Open the "Vehicles it fits" section to check your exact engine.
Does the Standard Ignition VCP147 vacuum pump fit the 2015-2018 Jeep Renegade?
Yes. Standard Ignition VCP147 is listed for the 2015-2018 Jeep Renegade, which takes one pump.
Does the Standard Ignition VCP147 vacuum pump come with a pulley or hardware?
No. The pump comes with a gasket and a mounting bracket. The pulley, mounting hardware, O-rings and relief valve are not included.
What hose size does this vacuum pump take?
This vacuum pump takes a 5/16 in hose and has one hose connector and one vacuum port, with an inlet size of 0.21 in (5.334 mm).
What does a failing belt-driven vacuum pump do to the brake pedal?
A hard pedal or weaker power assist can mean low vacuum. A shop can test the pump's vacuum output, and brake symptoms deserve prompt attention.
