Standard Ignition Voltage Regulator P/N:VR-453
Standard Ignition VR-779 voltage regulator for the 2005-2010 Kia Sportage V6 2.7L and other vehicles regulates the alternator's charging voltage.
A failing regulator can show up as a battery that won't hold a charge, dim headlights or a battery warning light. Those signs can have other causes, so with the engine off and cool, look over the battery terminals and the alternator connector for corrosion or looseness first. If the regulator is the cause, this one replaces it.
It is listed for a wide range of Hyundai and Kia models, led by the 2005-2009 Hyundai Tucson V6 2.7L and the 2003-2005 Hyundai Sonata V6 2.7L. The 2005-2010 Kia Sportage V6 2.7L takes one. If your car is a different model, open the "Vehicles it fits" section and check your exact model and engine there.
Fit and size
Build and materials
One voltage regulator. Mounting hardware, mounting brackets and instructions are not included, and the old fasteners may not be reusable, so plan on new ones.
Interchange: R2027 · VR1202 · VR1087 · 37037400 · 3737037400
This part cross-references / interchanges with the following part numbers:
Is the Standard Ignition VR-779 right for a 2005-2010 Kia Sportage V6 2.7L?
Yes. Standard Ignition VR-779 is listed for the 2005-2010 Kia Sportage V6 2.7L and takes one per vehicle. For another model, open the "Vehicles it fits" section to check your engine.
Does the VR-779 voltage regulator come with mounting hardware?
No. Standard Ignition VR-779 is sold as one voltage regulator; mounting hardware, mounting brackets and instructions are not included.
What connector does this 12-volt voltage regulator use?
This voltage regulator has one rectangular female connector and two male blade terminals. It is a 12-volt unit that mounts at the alternator.
What signs can a failing alternator voltage regulator cause?
A battery that won't hold a charge, dim headlights or a battery warning light can point to a charging problem. A shop can test the charging output to find the cause.
How is the VR-779 circuit board protected from vibration?
The electronic circuit board in the VR-779 is encapsulated in epoxy. This resists failure that vibration and corrosion of electrical connections may cause.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.