Keep pressurized brake fluid flowing to the front right brake with the Sunsong brake hose, part number 2203196. This brake hydraulic hose is a direct-fit replacement for the 2003-2004 Dodge Dakota (engine: All) and the 2003 Dodge Durango (engine: All). Sunsong designs it to deliver exact form, fit, and function on these applications.
Sunsong is a vertically integrated manufacturer that researches, develops, and builds automotive fluid transfer hoses and lines. Its products are developed around what the installer needs.
- Safety standards: Meets or exceeds DOT, Federal Vehicle Safety Standards (FMVSS 106), and SAE J1401 standards. The hose is DOT approved.
- Hardware supplied: A bracket is included. New copper washers come with the banjo end fitting to help it seal properly.
- Corrosion protection: The tubing is made from high grade steel and electroplated with a zinc coating. The coating resists corrosion and rust from high humidity, road salt, water, and grime.
- Pressure tested: Every hose goes through a high-pressure quality assurance test before it leaves the factory.
Specifications: EPDM hose with an overall length of 775 mm (30.51 in). End 1 is a 10 mm banjo fitting and End 2 is a 10 mm female fitting. The position is front right, and the listed applications use a quantity of 1. Country of origin: Thailand.
Signs a brake hose may need replacing include a soft or spongy brake pedal, fluid seeping at the hose or its fittings, and cracking, swelling, or chafing on the outer surface. Have the brake system diagnosed to confirm the cause. Bleed the brakes after installation as directed by the vehicle service information.
Frequently Asked Questions
What vehicles does the Sunsong brake hydraulic hose 2203196 fit?
It fits the 2003-2004 Dodge Dakota and the 2003 Dodge Durango (engine: All), in the front right position. See the "Vehicles it fits" section for full application details.
Does this brake hose come with a bracket and washers?
Yes. A bracket is included, and new copper washers are supplied for the banjo end fitting to help it seal properly.
What safety standards does part 2203196 meet?
It is DOT approved and meets or exceeds DOT, Federal Vehicle Safety Standards (FMVSS 106), and SAE J1401 standards.
What are the fitting types and length of this hose?
End 1 is a 10 mm banjo fitting and End 2 is a 10 mm female fitting. The overall length is 775 mm (30.51 in), and the hose material is EPDM.
What are signs a brake hose may need replacing?
Common signs include a soft or spongy pedal, fluid leaking at the hose or fittings, and cracks, swelling, or chafing on the hose. Diagnose the brake system to confirm the cause before replacing parts.
