Keep brake fluid moving where it needs to go with the Sunsong brake hydraulic hose, part number 2203726, built for the rear center position. It serves as a direct-fit replacement for many vehicles, among them the 1978-1988 Chevrolet Monte Carlo and 1978-1987 Chevrolet El Camino. See the "Vehicles it fits" section for the full list and engine details.
A brake hose is the flexible link in the hydraulic brake circuit. It carries pressurized brake fluid while allowing for suspension movement. Sunsong develops and builds fluid transfer hoses and lines, and designs each hose for exact form, fit and function.
- Fit-ready kit: Precision engineered to exact fit. Brackets, grommets, molded plastic guards, wire clips and protective sleeves are included as required, intended to return the wearable parts to original condition.
- Standards: Meets or exceeds DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards.
- Zinc-plated tubing: The tubing is high grade steel electroplated with a zinc coating. The coating provides corrosion and rust resistance against humidity, road salt, water and grime.
- Pressure tested: Every hose passes a high-pressure quality assurance test before it leaves the factory. Hoses with banjo end fittings come with new copper washers for sealing.
Signs this part may need replacing include a cracked, bulging or chafed hose, fluid seepage at a fitting, or a soft, spongy pedal.
Interchange: 150.62310 · 350-47135
15062310 · 35047135 · 18J90 · 77185 · BH99291 · SP5564 · BHA99291 · H99291 · 77185Z · 9761251 · 9761879 · 36826 · BH36826 · BH106342
This part cross-references / interchanges with the following part numbers:
18J90, 2203726, 77185, BH99291, BHA99291, SP5564, 150.62310, H99291, 77185Z, 9761251, 9761879, 36826, 350-47135, BH36826, BH106342
Frequently Asked Questions
Where does this Sunsong brake hose install?
It is cataloged for the rear center position on the listed applications, including the 1978-1987 Chevrolet El Camino and 1978-1988 Chevrolet Monte Carlo. See the "Vehicles it fits" section for the full list.
What safety standards does this brake hose meet?
Sunsong states its brake hoses meet or exceed DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards, and each hose is pressure tested before leaving the factory.
Does it come with brackets or other hardware?
Brackets, grommets, molded plastic guards, wire clips and protective sleeves are included as required for the application. Hoses with banjo end fittings include new copper washers.
What are signs a brake hose may need replacing?
Common signs include cracking, bulging or chafing on the hose, fluid leaks at a fitting, or a soft, spongy pedal. Diagnose the cause first, since other brake parts can cause similar symptoms.
Do I need to bleed the brakes after installing it?
Yes. Replacing a brake hose opens the hydraulic system, so bleed the brakes per the vehicle service information to remove air before driving.
