Keep brake fluid flowing to the rear right wheel with the Sunsong brake hose, part number 2203815. This Sunsong brake hydraulic hose is a direct-fit replacement for the rear right position on the 2001-2006 Chrysler Cirrus, 2001-2006 Chrysler Sebring and 2001-2006 Dodge Stratus. See the "Vehicles it fits" section for engine-specific details.
A brake hydraulic hose is the flexible link that carries pressurized brake fluid from the vehicle's rigid brake lines to the brake at the wheel, while allowing for suspension movement. Sunsong is a vertically integrated manufacturer that researches, develops and builds automotive fluid transfer hoses and lines.
- Standards: Meets or exceeds DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards.
- Restoration hardware: Precision engineered to exact fit, with brackets, grommets, molded plastic guards, wire clips and protective sleeves included as required so wearable parts are returned to original condition. Hoses with banjo end fittings come with new copper washers for proper sealing.
- Corrosion protection: Tubing is made from high-grade steel and electroplated with a zinc coating for corrosion and rust resistance against high humidity, road salt, water and grime.
- Pressure tested: Every hose goes through a high-pressure quality assurance test before it leaves the factory.
Signs a brake hose may need replacing include a soft or spongy pedal, fluid seepage at the hose or its fittings, and a cracked, chafed or bulging outer cover. Diagnose the cause before replacing parts, and bleed the brake system after installation as directed by the vehicle service information.
Interchange: 1474-17010 · 150.63357 · 350-39047
147417010 · 15063357 · 35039047 · BH621092 · SP11072 · BHA621092 · H621092 · 79778 · BH382909 · BH140153
This part cross-references / interchanges with the following part numbers:
2203815, 1474-17010, BH621092, BHA621092, SP11072, 150.63357, H621092, 79778, 350-39047, BH382909, BH140153
Frequently Asked Questions
What vehicles does the Sunsong 2203815 fit?
It is listed for the rear right position on the 2001-2006 Chrysler Cirrus, 2001-2006 Chrysler Sebring and 2001-2006 Dodge Stratus. See the "Vehicles it fits" section for engine details.
What standards does this brake hose meet?
Sunsong states its brake hoses meet or exceed DOT, FMVSS 106 and SAE J1401 standards. Each hose is also high-pressure tested before leaving the factory.
Does it come with brackets or other hardware?
Brackets, grommets, molded plastic guards, wire clips and protective sleeves are included as required for the application. Hoses with banjo end fittings include new copper washers.
What are signs a brake hose may need replacing?
A soft or spongy pedal, fluid leaks at the hose or fittings, or a cracked, chafed or bulging cover can indicate a worn hose. Have the brake system diagnosed before replacing parts.
Do I need to bleed the brakes after installing it?
Yes. Opening the hydraulic system lets air in, so bleed the brakes and check the fluid level as outlined in the vehicle service information after installing the hose.
