Sunsong Brake Hydraulic Hose P/N:2204622A
Sunsong 2204622 front right brake hydraulic hose for the 1999-2006 Chevrolet Silverado 1500 and other vehicles carries brake fluid to the caliper at the front right wheel.
A hose that is cracked, bulging or weeping fluid, or a soft brake pedal, can mean the hose is wearing out. Before you replace it, rule out a leaking caliper or loose fitting, since those can show the same fluid loss. This listing is one hose for the right side, and both front hoses are normally replaced together.
This direct-fit replacement also fits the 1999-2006 GMC Sierra 1500 and the 2000-2006 Chevrolet Tahoe. Driving a different truck or SUV? Look up your own vehicle in the "Vehicles it fits" section.
Fit and size
Build and materials
The box holds one hose, and the front right corner needs one. A bracket, mounting hardware and new copper washers for the banjo end come with it; a banjo bolt is not included, so plan on a new one.
Interchange: 176-1909 · 1474-02656 · 1474-324564 · 150.66097 · 150.66125 · 350-47328
18J4299 · SP10603 · H620442 · 15075659 · 15102329 · 15196561 · 15748044 · 15882780 · 19331538 · 19366696 · 21999050 · 21999058 · 382414 · BH382414 · BH140188 · BH143280
This part cross-references / interchanges with the following part numbers:
Does the Sunsong brake hose 2204622 fit a 1999-2006 GMC Sierra 1500?
Yes, Sunsong 2204622 is a front right brake hydraulic hose for the 1999-2006 GMC Sierra 1500 and the 2000-2006 Chevrolet Tahoe; for any other vehicle, look it up in the "Vehicles it fits" section.
Does this Sunsong brake hydraulic hose come with a banjo bolt?
No, Sunsong 2204622 ships without a banjo bolt, so plan on a new one. It does include a bracket, mounting hardware and new copper washers for the banjo end.
What are the hose material and length of this front right brake hose?
The hose is EPDM and 695 mm (27.36 in) long overall. One end is a banjo fitting with a 10 mm thread, and the other is a female fitting with a 7/16 in thread.
Is this front right brake hose DOT approved?
Yes, this front right hose is DOT approved and meets or exceeds DOT, FMVSS 106 and SAE J1401 standards. Each hose also passes a high pressure quality assurance test before leaving the factory.
How can I tell a front brake hose is going bad?
Cracks or bulges in the rubber, fluid seepage at the hose, or a soft pedal can all point to a worn hose. Have a shop inspect it promptly, since driving on a damaged brake hose is unsafe.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.