Dorman 520-132 front right lower control arm with ball joint for the 1994-1998 Buick Skylark and other vehicles locates the front right wheel as the suspension moves. The Dorman suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications.
- Ball joint and rubber bushings come pre-installed on the steel arm
- Additional coatings resist rust and corrosion
- Pre-greased ball joint with a threaded stud, 14 mm thread diameter
- Control arm assembly tested for a smooth ride and directional stability
Quick facts
- Part: Dorman 520-132 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: the 1994-1998 Buick Skylark and other vehicles
- Position: Front right lower
- Material: Steel
- Condition: New
A worn control arm or ball joint can show up as a clunk over bumps, loose or wandering steering, or uneven front tire wear. These signs alone do not prove this arm is at fault, since a worn tie rod end can cause a similar clunk.
Fits
It is listed for a wide range of Buick, Oldsmobile, Pontiac and Chevrolet models, including the 1994-1998 Buick Skylark, the 1994-1998 Oldsmobile Achieva and the 1994-1998 Pontiac Grand Am, with one arm going on the front right of each. If your car is not named here, look for it in the Vehicles it fits section. This listing is one arm for the front right; the front left is a separate part, and that axle's pair is normally done at the same time.
Specifications
Fit and size
- Position: front right lower
- Quantity: 1 per listing, for the front right side
- Mounting hole diameter: 12.3 mm
- Maximum width: 288.5 mm
- Maximum length: 237 mm
- Ball joint thread diameter: 14 mm
Build and materials
- Control arm type: casting/forged
- Control arm material: steel
- Bushing material: rubber
- Ball joint stud: threaded, pre-greased
- Grade: standard replacement
- Condition: new
- Country of origin: Taiwan
In the box
One control arm with ball joint and rubber bushings installed, plus mounting hardware. A grease fitting is not included.
Interchange: TC6560 · CA14105 · 22576821 · 22597832 · 22603945 · 22603950 · 22603952 · 22611130 · 22611132 · 22611134 · CK620254 · RK620297 · FA4434 · GS50112 · CMS50112 · 2605538 · 5CB50063 · SK520132 · 1503024 · JTC1953
This part cross-references / interchanges with the following part numbers:
TC6560, CA14105, 22576821, 22597832, 22603945, 22603950, 22603952, 22611130, 22611132, 22611134, CK620254, RK620297, FA4434, GS50112, CMS50112, 2605538, 5CB50063, SK520132, 1503024, JTC1953
Frequently Asked Questions
Is the Dorman lower control arm 520-132 the right one for a 1994-1998 Buick Skylark?
Yes. Dorman 520-132 is the front right lower control arm with ball joint listed for the 1994-1998 Buick Skylark. For any other car, look it up in the Vehicles it fits section.
Does this Dorman control arm come with the ball joint and bushings installed?
Yes. Dorman 520-132 comes with the ball joint and rubber bushings already installed, plus mounting hardware. A grease fitting is not included.
What stud thread does the ball joint on this Dorman suspension control arm have?
The ball joint has a threaded stud with a 14 mm thread diameter. The arm is steel, and its mounting hole is 12.3 mm across.
Can worn Dorman control arm bushings cause a clunk over bumps?
They can. Cracked or split rubber, a clunk over bumps or uneven front tire wear are common signs, and a shop can confirm which suspension part is worn.
Does Dorman 520-132 cross-reference to CK620254?
Yes. CK620254 is one of the numbers this Dorman 520-132 replaces, along with 22576821 and TC6560.
