Delphi TC5362 front right lower control arm with ball joint for the 1999-2004 Honda Odyssey links the wheel to the chassis. This control arm and ball joint assembly lets the wheel move with the suspension.
- Tested to withstand temperatures below -40 degrees C and over 120 degrees C and 720 hours of salt spray
- 100% crack detection and ultrasonic flaw detection on each control arm
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot-welded control arm for consistent performance and quality
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC5362 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 1999-2004 Honda Odyssey
- Position: Front right lower
- Condition: New
Clunks over bumps, loose steering or uneven front tire wear can mean a worn lower control arm or ball joint. Before you replace this arm, rule out other worn suspension parts, such as a sway bar link, strut mount or tie rod end, which can make similar noises.
Fits
This front right lower arm is a direct-fit replacement for the 1999-2004 Honda Odyssey, which takes one on this side. Front lower arms are normally replaced as a pair, and this listing is one arm for the right side; the left is a separate part.
Specifications
Fit and size
- Position: Front right lower
- Quantity per vehicle: 1
Build and materials
- Type: control arm with ball joint
- Construction: robot-welded
- Corrosion protection: anti-corrosion protection applied to each part
- Condition: New
Interchange: 102-5683 · 623.40049 · 521-352 · 51350-S0X-A02
51350S0XA00 · 51350S0XA01 · CB59004 · CK620325 · RK620325 · CMS60104 · GS60104 · JTC1809
This part cross-references / interchanges with the following part numbers:
102-5683, 623.40049, 521-352, 51350S0XA00, 51350S0XA01, 51350-S0X-A02, CB59004, CK620325, RK620325, CMS60104, GS60104, JTC1809
Frequently Asked Questions
Does the Delphi TC5362 control arm with ball joint fit the 1999-2004 Honda Odyssey?
Yes. Delphi TC5362 is the front right lower control arm with ball joint for the 1999-2004 Honda Odyssey. The front left side is a separate part.
Is this lower control arm for the left or the right side?
This lower control arm is for the front right position only. The front left side uses its own separate part.
Does the Delphi TC5362 arm come with the ball joint?
Yes. Delphi TC5362 is a control arm with the ball joint built in, and its ball studs are machined to micron tolerances.
Is this control arm tested for extreme temperatures and rust?
Yes. The arm is tested below -40 degrees C, above 120 degrees C and for 720 hours of salt spray, and it has anti-corrosion protection applied.
Does Delphi TC5362 replace part number 51350-S0X-A02?
Yes. 51350-S0X-A02 is one of the numbers Delphi TC5362 replaces. The Interchange line on this page lists the other cross-reference numbers.
