Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS20380
Mevotech Supreme CMS101483 front left lower control arm with ball joint for the 2013-2022 Land Rover Range Rover and other vehicles connects the front left wheel to the suspension and lets it move up and down. This Mevotech Supreme lower control arm is built for high-usage commercial and passenger vehicles, SUVs, fleets and working trucks.
A worn ball joint or bushing can show up as a clunk over bumps, loose steering or uneven tire wear. Those signs alone do not prove this arm is the problem, since a worn tie rod is another common cause. If the arm or its ball joint is the cause, this control arm and ball joint assembly replaces both in one piece.
It fits the 2013-2022 Land Rover Range Rover, the 2014-2022 Land Rover Range Rover Sport and the 2017-2020 Land Rover Discovery. Arms are normally replaced as a left and right pair, and this listing is one arm; each side of the front axle takes one, and the front right is a separate part.
Fit and size
Build and materials
One control arm with its ball joint and rubber bushings, plus the application-specific pinch bolt and locking nut.
Interchange: 526-625 · 526-835
19384861 · QGS101483 · TC3729 · CB35083 · CB35083PR · CA12923 · 5CB10726 · LR034220 · LR045245 · LR072468 · LR072469 · LR073465 · LR113307 · LR113703 · LR126102 · LR148060 · C6GS101483 · GS101483 · 2608537 · 1384101 · 30036622 · X25CJ2125
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a Range Rover control arm for the 2013-2022 Land Rover Range Rover?
Yes. Mevotech Supreme CMS101483 fits the 2013-2022 Land Rover Range Rover, the 2014-2022 Land Rover Range Rover Sport and the 2017-2020 Land Rover Discovery, in the front left lower position.
What comes with the Mevotech Supreme suspension control arm?
This control arm comes with its ball joint and rubber bushings, plus an application-specific pinch bolt and locking nut for the ball joint.
Is the Mevotech Supreme control arm pre-greased?
Yes. Mevotech Supreme CMS101483 is pre-greased and has a press-in ball joint with a threaded stud.
How can I tell if the ball joint on this control arm is worn?
A clunk over bumps, loose or wandering steering, or uneven tire wear can mean a worn ball joint or bushing. A shop can check the joint for play.
Does Mevotech CMS101483 replace Land Rover LR034220?
Yes. LR034220 is one of the Land Rover numbers this control arm replaces, along with LR045245 and LR072468.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.