Mevotech TTX Suspension Control Arm and Ball Joint Assembly P/N:CTXMS501118
Mevotech TTX CTXMS50189 front right upper control arm with ball joint for the 1999-2000 Chevrolet Silverado 2500 and other vehicles holds the front right wheel in place and lets it move with the suspension. This Mevotech TTX suspension control arm and ball joint assembly is built for high-usage commercial and passenger vehicles, SUVs, fleets and working trucks.
Clunking over bumps, loose or wandering steering and uneven tire wear can be signs of a worn ball joint or bushing. A worn sway bar link, tie rod end or strut can produce similar noises and handling changes, so find out which part is at fault before you buy.
The vehicles it fits include the 1999-2000 Chevrolet Silverado 2500, the 2003-2025 Chevrolet Express 2500 and the 2003-2025 Chevrolet Express 3500. Don't see your van or truck here? Look it up in the "Vehicles it fits" section.
Fit and size
Build and materials
One front right upper control arm with ball joint, rubber bushings, a slotted castle nut, a snap cotter pin and a 90 degree SAE grease fitting. This side takes one; the left side is ordered separately, and both sides are normally replaced together.
Product information is for general reference and may contain errors. See our Disclaimer.
Will this 1999-2000 Chevrolet Silverado 2500 control arm fit the front right upper position?
Yes, Mevotech TTX CTXMS50189 is the front right upper control arm with ball joint for the 1999-2000 Chevrolet Silverado 2500; the left side is a separate part.
Does the Mevotech TTX control arm come with a castle nut and cotter pin?
Yes. Mevotech TTX CTXMS50189 includes a slotted castle nut, a snap cotter pin, rubber bushings and a 90 degree SAE grease fitting.
What are the bushings and bearings made of on this control arm?
The control arm is steel with rubber bushings, and the bearing is sintered metal. The ball joint is a press-in type with a threaded stud.
How can I tell if the ball joint on a control arm like this is wearing out?
Noise over bumps, loose-feeling steering or uneven tire wear can all point to play in the joint. A shop can measure that play safely.
Is the ball joint on Mevotech TTX CTXMS50189 pre-greased?
Yes. The ball joint is pre-greased and greaseable, and the included 90 degree SAE grease fitting is for servicing it.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.