Delphi Suspension Stabilizer Bar Link Kit P/N:TC2287
Keep body roll in check with the Delphi Suspension Stabilizer Bar Link Kit (TC6952) — front Ram 1500 sway bar links that tie the stabilizer bar to the suspension so the bar can resist lean through corners. This front stabilizer bar link kit drops in as a direct-fit replacement for the 2006-2010 Dodge Ram 1500, 2011-2018 RAM 1500, and 2019-2024 RAM 1500 CLASSIC; see the Buyer's Guide tab for engine-level fitment.
Delphi builds this link from its OE engineering, with parts tested to the extreme: withstanding temperatures below -40°C and over 120°C, plus 720 hours of salt spray, and dimensional and material analysis for close OE-to-aftermarket compatibility.
Worn links often show up as a clunk or rattle from the front over bumps; if a failed link is the cause, replacing it restores the stabilizer bar's connection to the suspension. Links are best replaced as a pair for balanced handling.
Interchange: 5170 290AD · 536-441
5170290AD · 536441 · 5170290AB · 5170290AC · 5170290AE · SL82055 · SL82055RD · SL82055XL · K80894 · GK80894 · GS25808 · MK80894 · MS25808 · JTS734
This part cross-references / interchanges with the following part numbers:
What does the Delphi TC6952 stabilizer bar link kit do?
It links the front stabilizer (sway) bar to the suspension, letting the bar resist body lean in turns. Worn links let that connection loosen, causing clunks and reduced roll control.
Does this fit my Ram 1500?
It's a direct-fit front replacement for the 2006-2010 Dodge Ram 1500, 2011-2018 RAM 1500, and 2019-2024 RAM 1500 CLASSIC. Check the Buyer's Guide tab to confirm engine-level fitment for your truck.
Is TC6952 the right 2019 Ram 1500 sway bar link?
Yes — the 2019-2024 RAM 1500 CLASSIC is listed among its front applications. Confirm your exact configuration in the Buyer's Guide tab before ordering.
Will these work on a lifted Dodge Ram 1500?
They are direct-fit OE-style front links for the listed applications. A lifted Ram may require extended links depending on lift height, so verify link length against your setup.
What are signs a front sway bar link needs replacing?
Common signs include a clunk or rattle from the front over bumps, looser handling, and cracked or loose link joints. Diagnose the cause before replacing.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.