Delphi TC1020 front sway bar link kit for the 2002 Mini Cooper connects the front sway bar to the suspension to help limit body roll. It is also sold as a stabilizer bar link kit.
- Sway bar links fatigue tested to avoid failure
- Ultrasonic molding to help prevent future weld breakage
- Machined to micron tolerances for durability and smooth joint operation
- Anti-corrosion protection applied to each part
- Tested below -40 °C and above 120 °C, and exposed to 720 hours of salt spray
Quick facts
- Part: Delphi TC1020 sway bar link kit
- Also called: stabilizer bar link kit
- Fits: 2002 Mini Cooper
- Position: Front
A clunk or rattle over bumps, or a loose feel in turns, can mean a worn sway bar link. Before you replace the links, rule out other suspension parts, such as worn bushings or loose fasteners, as the source of the noise. Both front links are normally replaced together, and this listing is one link kit.
Fits
This is a direct-fit replacement for the 2002 Mini Cooper. The 2002 Mini Cooper takes two of these links.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 2
Build and materials
- Construction: ultrasonic molding
- Corrosion protection: anti-corrosion protection on each part
- Testing: fatigue tested
Interchange: 101-7023 · 536-337
3135 1507 989 · LS13056 · KSLF4153 · SL29025 · K80498 · GK80498 · MK80498 · JTS413
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
3135 1507 989, 101-7023, 536-337, LS13056, KSLF4153, SL29025, K80498, GK80498, MK80498, JTS413
Frequently Asked Questions
Is the Delphi TC1020 sway bar link kit right for a 2002 Mini Cooper?
Yes. Delphi TC1020 is a front sway bar link kit listed for the 2002 Mini Cooper, and that car takes two.
What does ultrasonic molding do on these sway bar links?
Ultrasonic molding is used on these links to help prevent future weld breakage.
Is the Delphi TC1020 kit for the front or the rear of the car?
It is for the front. This Delphi TC1020 listing is one front sway bar link kit.
What can a worn front sway bar link sound like?
A clunk or knock over bumps, or a loose feel in turns, can mean a worn link. A shop can inspect and test the front suspension.
Is K80498 an interchange number for this link kit?
Yes. K80498 is one of the numbers the Delphi TC1020 kit replaces; the Interchange line on the page lists the rest.
