Delphi Suspension Stabilizer Bar Link Kit P/N:TC2917
$32.99
(You save)
Help keep body roll in check with the Delphi TC2917 front sway bar link kit, a direct-fit replacement for the 2010-2011 Subaru Outback, 2008-2011 Subaru Tribeca and 2006-2007 Subaru B9 Tribeca. Delphi's OE safety technology is fitted to millions of vehicles worldwide, and the company brings that OE expertise to its aftermarket steering line. Its dimensional and material analysis aims for close compatibility between the OE and aftermarket part.
Fatigue tested: Delphi fatigue tests its sway bar links, which is designed to help avoid failure.
Ultrasonic molding: the links are made with ultrasonic molding to help prevent future weld breakage.
Micron-tolerance machining: Delphi machines its parts to micron tolerances for durability and smooth joint operation.
Anti-corrosion protection: applied to each part to help prevent corrosion and improve its appearance.
Delphi tests its parts at temperatures below -40°C and above 120°C, and exposes them to 720 hours of salt spray. In the front suspension, the link connects the sway bar to the suspension so the bar can resist body lean as the vehicle corners. A worn link can cause a clunk or rattle over bumps, extra lean in turns, or a loose feel. If the link is the cause, this kit replaces it. Engine and trim details are in the Buyer's Guide tab.
Will the Delphi TC2917 fit my Subaru Outback or Tribeca?
It is a direct-fit replacement for the 2010-2011 Subaru Outback and the 2008-2011 Subaru Tribeca, among other listed applications. Check the Buyer's Guide tab for your vehicle.
What does a stabilizer bar link kit do?
It connects the front sway bar to the suspension so the bar can transfer load from side to side and help limit body lean when cornering.
What are signs a front sway bar link may need replacing?
Common signs include a clunk or rattle from the front suspension over bumps, extra body lean in turns, or a loose feel. Diagnose the cause first, because other worn parts can cause similar symptoms.
How does Delphi test the TC2917?
Delphi fatigue tests its sway bar links. It also tests parts at temperatures below -40°C and above 120°C and exposes them to 720 hours of salt spray.
Is the TC2917 protected against corrosion?
Yes. Delphi applies anti-corrosion protection to each part to help prevent corrosion and improve its appearance.
Write a Review
Delphi
Delphi Suspension Stabilizer Bar Link Kit P/N:TC2917
Keep the front sway bar working with the wheel and quiet the rattles and clunks that come from a worn link with the Delphi Suspension Stabilizer Bar Link Kit TC2198. Cataloged for the front right...
Keep your stabilizer bar working with the body roll and your suspension planted through the corners with the Delphi Suspension Stabilizer Bar Link Kit (TC2288). This is the REAR LEFT link, a...
Keep body roll in check and restore the connection between the rear stabilizer bar and the suspension with the Delphi Suspension Stabilizer Bar Link Kit TC1002. This rear-position sway bar link kit...
Keep body roll in check and restore a solid, quiet front end with the Delphi Suspension Stabilizer Bar Link Kit TC2155. This front left sway bar link connects the stabilizer bar to the suspension so...
Keep your front stabilizer bar working with the body-roll it's meant to control using the Delphi Suspension Stabilizer Bar Link Kit TC2700. This front sway bar link kit connects the front stabilizer...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
