Delphi Suspension Stabilizer Bar Link Kit P/N:TC771
Tie the front sway bar to the suspension and keep body roll in check with the Delphi Suspension Stabilizer Bar Link Kit TC2513, cataloged for the front right position. This stabilizer bar link kit drops in as a direct-fit replacement for the 2015-2017 Mercedes-Benz CLS400, 2012-2017 CLS550, 2012-2013 CLS63 AMG, 2014-2016 E250, 2010-2016 E350, 2013-2017 E400, 2010 E550, and 2010-2013 E63 AMG — see the Buyer's Guide tab for engine-level fitment and the full list.
Delphi carries its OE engineering into its aftermarket steering and suspension line, with dimensional and material analysis for close OE-to-aftermarket compatibility. Parts are validated across extremes below -40°C and above 120°C plus 720 hours of salt-spray exposure.
Worn links often signal themselves with clunking or rattling over bumps, looseness in the sway bar, or more body lean in turns. If a failed front right link is the cause, this kit replaces it.
Interchange: 101-7682 · 606.35027 · 212 320 12 89 · A212 320 1289
1017682 · 60635027 · 2123201289 · A2123201289 · LS13063 · SL28484 · SL28484PR · SL28494 · K750411 · SL990 · GS108108 · MS108108 · JTS1737
This part cross-references / interchanges with the following part numbers:
What is a sway bar link and what does this kit do?
A sway bar (stabilizer bar) link connects the sway bar to the suspension, helping control body roll in turns. This Delphi kit replaces the front right link for the listed Mercedes-Benz applications.
Which position does the TC2513 fit?
It is cataloged for the front right position. For paired handling, inspect the opposite-side link and replace it if it shows similar wear.
What vehicles does this link kit fit?
It's a direct-fit for the 2015-2017 CLS400, 2012-2017 CLS550, 2012-2013 CLS63 AMG, 2014-2016 E250, 2010-2016 E350, 2013-2017 E400, 2010 E550, and 2010-2013 E63 AMG. Check the Buyer's Guide tab.
What are signs the sway bar link may need replacing?
Common signs include clunking or rattling over bumps, a loose-feeling sway bar, or increased body lean in corners. Diagnose the cause before replacing, since other parts can produce similar symptoms.
How is this Delphi link built for durability?
It's fatigue tested to help avoid failure, molded ultrasonically to help prevent weld breakage, machined to micron tolerances for smooth joint operation, and treated with anti-corrosion protection.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.