Delphi Suspension Stabilizer Bar Link Kit P/N:TC6700
Keep body roll in check and quiet the front suspension with the Delphi Suspension Stabilizer Bar Link Kit (P/N: TC2512), a front left sway bar link built with Delphi's OE steering and suspension expertise. It links the stabilizer bar to the front left suspension so the bar can resist lean through corners and over uneven pavement. It installs as a direct-fit replacement for the 2015-2017 Mercedes-Benz CLS400, 2012-2017 CLS550, 2012-2013 CLS63 AMG, 2013-2017 E400, 2014-2016 E250, 2010-2016 E350, 2010 E550, and 2010-2013 E63 AMG — see the Buyer's Guide tab for the full list and engine details.
Worn stabilizer bar links often announce themselves with clunking, knocking, or rattling from the front end over bumps or through turns. If a failed link is the cause, this stabilizer bar link kit replaces it.
Interchange: 101-7681 · 606.35026 · 212 320 11 89 · A212 320 1189
1017681 · 60635026 · 2123201189 · A2123201189 · LS13062 · SL28483 · SL28493 · K750410 · SL989 · 212320118964 · GS108107 · MS108107 · JTS1738
This part cross-references / interchanges with the following part numbers:
What is this Delphi TC2512 part and where does it mount?
It's a front left suspension stabilizer bar link kit that connects the front stabilizer (sway) bar to the suspension, helping the bar control body roll during cornering and over uneven roads.
Which vehicles does the TC2512 fit?
It's a direct-fit replacement for the Mercedes-Benz CLS400, CLS550, CLS63 AMG, E250, E350, E400, E550, and E63 AMG across the model years listed. Check the Buyer's Guide tab to confirm your year and engine.
What are the signs my stabilizer bar link kit may need replacing?
Clunking, knocking, or rattling from the front end over bumps or through turns can indicate a worn link. Diagnose the cause first; if a failed link is to blame, this replaces it.
How is this Delphi sway bar link built for durability?
It's fatigue tested to help avoid failure, ultrasonic molded to help prevent weld breakage, machined to micron tolerances for smooth joint operation, and treated with anti-corrosion protection.
What testing does Delphi put this link through?
Delphi validates it below -40°C and above 120°C and exposes it to 720 hours of salt spray, using dimensional and material analysis for close OE compatibility.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.