Monroe Shocks & Struts 172230 front left strut assembly for the 2003-2006 Acura MDX replaces the strut, coil spring and upper mount as one preassembled unit. Sold as a complete strut and coil spring assembly, it arrives ready to install.
- Monroe Quick-Strut line with application-specific spring, mount and strut designs
- Coil spring engineered to restore ride height and support the vehicle's weight
- Upper strut mount helps keep steering precise and limits noise, vibration and memory steer
- Gas-charged strut that reduces body sway, vibration and road harshness
- Protective coating that resists rust and corrosion, salt spray tested
- Steel construction with a welded design for structural integrity
Quick facts
- Part: Monroe Shocks & Struts 172230 strut assembly
- Also called: complete strut and coil spring assembly
- Fits: 2003-2006 Acura MDX
- Position: Front left
- Condition: New
A strut body wet with fluid, a cracked spring, knocking over bumps or a front left corner that sits lower than the other side can mean the assembly is worn. Before replacing it, look it over with the engine off and the car parked, and leave anything you cannot see to a shop, since other suspension parts can give a similar ride.
Fits
It is a direct-fit replacement for the 2003-2006 Acura MDX. This listing is one assembly for the front left, which takes one; the front right is a separate part, and the pair is normally replaced together.
Specifications
Fit and size
- Position: front left
- Quantity per application: 1
- Body length: 17.06 in
- Compressed length: 15 in (381 mm)
- Extended length: 21.69 in (550.9 mm)
- Travel length: 6.69 in
Build and materials
- Type: gas-charged, passive strut assembly; compression and ride height not adjustable
- Coating: protective rust-resistant coating
- Assembled in Paragould, Arkansas
- Condition: new
- Warranty: Monroe limited lifetime warranty
In the box
One front left strut assembly with coil spring, strut mount, coil spring insulators, strut mount insulators and mounting hardware.
Installation notes
- Comes fully assembled, so no spring compressor is needed.
Interchange: LS5599021L · 34AC1102
Frequently Asked Questions
Does the Monroe Quick-Strut 172230 fit the 2003-2006 Acura MDX?
Yes. Monroe Shocks & Struts 172230 is a front left strut assembly for the 2003-2006 Acura MDX. The front right side is a separate part.
Do I need a spring compressor with this Monroe Quick-Strut assembly?
No. The strut, coil spring and upper mount arrive preassembled in one unit, so no spring compressor is needed. Mounting hardware is included.
What are the compressed and extended lengths of the Monroe 172230 strut?
The Monroe 172230 measures 15 in (381 mm) compressed and 21.69 in (550.9 mm) extended, with 6.69 in of travel.
What does a worn gas-charged strut assembly look like on the front left?
With the engine off, look for fluid on the strut body or a cracked coil spring. Knocking over bumps or extra body sway can also mean the strut assembly is worn.
Does Monroe 172230 replace the LS5599021L strut assembly?
Yes. LS5599021L is listed as an interchange number for this Monroe 172230 front left strut assembly.
