Keep the rear anti-roll system firmly connected to the suspension with the Mevotech TTX Sway Bar Link Kit TXMS40899. It is a direct-fit replacement for the rear position on the 2011-2015 Ford Edge and the 2011-2015 Lincoln MKX. The link ties the sway bar to the suspension so the bar can help control body roll through turns.
Mevotech engineers its TTX line for high-usage commercial and passenger vehicles, SUVs, fleets and working trucks. It pairs the line with Labor Saver designs, tools and hardware intended to make installation faster and easier.
- Maximum toughness: Patented sintered bearings are designed for longer-lasting performance.
- Superior seal: An Integri-Boot design built into the ball joint assembly helps keep moisture and contaminants out.
- Larger sphere design: An application-specific ball stud system uses a larger sphere.
- Service-friendly hardware: A 90-degree SAE grease fitting is included for lubrication, and a part-specific nylon locking nut is provided to speed up installation.
Signs a rear sway bar link may need replacing include:
- Clunking or rattling from the rear over bumps
- A loose feel
- Increased body lean in corners
- A torn boot
If a worn link is the cause, this kit replaces it. See the "Vehicles it fits" section for engine-specific fitment details.
Interchange: 512-498324
512498324 · 19473484 · TC5698 · SL85765 · SL85765XL · SL750580 · BT4Z5A486A · K750580 · SL1026 · 22102 · X15SL0519 · JTS1506 · TK750580
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
19473484, 512-498324, TC5698, SL85765, SL85765XL, SL750580, BT4Z5A486A, K750580, SL1026, TXMS40899, 22102, X15SL0519, JTS1506, TK750580
Frequently Asked Questions
What vehicles does the Mevotech TTX TXMS40899 fit?
It fits the rear suspension of the 2011-2015 Ford Edge and the 2011-2015 Lincoln MKX. See the "Vehicles it fits" section for engine-specific details.
Is this the same as a stabilizer bar link kit?
Yes, the two names describe the same part. It is a link that connects the sway bar to the suspension so the bar can help control body roll.
Does the kit include a grease fitting?
Yes. A 90-degree SAE grease fitting is included so the joint can be lubricated during routine service. A part-specific nylon locking nut is also provided.
What are signs a rear sway bar link may be worn?
Common signs include clunking or rattling from the rear over bumps, a loose feel, extra body lean in corners, or a torn boot. Diagnose the cause before replacing parts.
What does the Integri-Boot design do?
The Integri-Boot is built into the ball joint assembly. It is designed to help keep moisture and contaminants out of the joint.
