TERREPOWER 101-0132 rack and pinion for the 1998-2000 Ford Explorer and other vehicles turns steering wheel rotation into side-to-side wheel movement. It is a remanufactured hydraulic power steering unit.
- Remanufactured for dependable, reliable use across the vehicle's service life
- Inner tie rods included with the rack and pinion
- Pressure and return ports both threaded M16X1.50
- 4.063 total turns lock to lock
Quick facts
- Part: TERREPOWER 101-0132 rack and pinion
- Also called: rack and pinion assembly
- Fits: 1998-2000 Ford Explorer and other vehicles
- Condition: Remanufactured
A worn rack and pinion assembly can show up as heavy or loose steering, a groan or whine when turning, or power steering fluid leaking at the rack. A tie rod, a hose, the power steering pump or a worn suspension joint can be behind these signs too, so find the cause before buying a replacement.
Fits
It is listed for a wide range of Ford and Mazda models, led by the 1998-2000 Ford Explorer, the 1998-2000 Ford Ranger and the 2001-2003 Mazda B2300; each takes one. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Quantity per vehicle: 1
- Mounting holes: 2
- Input shaft length: 1.563 in
- Steering input shaft diameter: 0.75 in
- End to end length: 44.87 in
Build and materials
- Type: Hydraulic
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One remanufactured rack and pinion. Outer tie rods and bushings are not included.
Interchange: F87Z-3504-KB · F87Z-3504-KBRM
This part cross-references / interchanges with the following part numbers:
F87Z-3504-KB, F87Z-3504-KBRM
Frequently Asked Questions
Is this the right rack and pinion for the 1998-2000 Ford Explorer?
Yes, TERREPOWER 101-0132 is listed for the 1998-2000 Ford Explorer, and that vehicle takes one. Open the "Vehicles it fits" section to check your exact engine.
Will this work as a rack and pinion for the 1998-2000 Ford Ranger?
Yes, this rack and pinion is listed for the 1998-2000 Ford Ranger, and that vehicle takes one.
Are tie rods included with this remanufactured rack and pinion?
The inner tie rods are included. The outer tie rods and the bushings are not, so they would be ordered separately.
What size is the steering input shaft on this rack and pinion?
The steering input shaft is 0.75 inch in diameter and 1.563 inches long. The unit has 4.063 total turns lock to lock.
Does Ford number F87Z-3504-KB interchange with the TERREPOWER 101-0132?
Yes, F87Z-3504-KB is listed as an interchange number for TERREPOWER 101-0132, along with F87Z-3504-KBRM.
