TERREPOWER N101-0107 rack and pinion for the 1982-1993 Ford Mustang and other vehicles turns steering wheel motion into side-to-side wheel movement with hydraulic assist. It is a new power steering rack and pinion assembly built for dependability across the vehicle's service life.
- Hydraulic power steering rack, sold new
- Inner tie rods and bushings included
- 3.063 turns lock to lock
- Pressure port thread 9/16X18 and return port thread 5/8X18
Quick facts
- Part: TERREPOWER N101-0107 rack and pinion
- Also called: rack and pinion assembly
- Fits: 1982-1993 Ford Mustang and other vehicles
- Condition: New
Heavy or loose steering, fluid weeping around the rack or a clunk when turning can mean the rack is wearing out. A worn power steering pump or a loose tie rod end can also make the steering feel off, so these signs alone do not point to the rack.
Fits
This rack and pinion is a direct-fit replacement for the 1982-1993 Ford Mustang, the 1984-1992 Lincoln Mark VII and the 1980-1988 Ford Thunderbird. A 1982-1993 Ford Mustang takes one rack. Driving a different car? Look for your make, model and year in the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 1
- Mounting holes: 2, 15.5 in (393.7 mm) apart
- End-to-end length: 45 in (1143 mm)
- Input shaft length: 2 in (50.8 mm)
- Input shaft diameter: 0.75 in (19.05 mm)
Build and materials
- Type: Hydraulic
- Condition: New
- Country of origin: China
In the box
One rack and pinion with its inner tie rods and bushings. Outer tie rods are not included.
Frequently Asked Questions
Is this a Mustang rack and pinion for the 1982-1993 Ford Mustang?
Yes, TERREPOWER N101-0107 fits the 1982-1993 Ford Mustang, the 1984-1992 Lincoln Mark VII and the 1980-1988 Ford Thunderbird. For another car, check the "Vehicles it fits" section.
Does this rack and pinion come with tie rods?
Inner tie rods and bushings are included with the TERREPOWER N101-0107. Outer tie rods are not included, so they are ordered separately.
What size is the input shaft on this power steering rack?
The TERREPOWER N101-0107 input shaft is 0.75 in (19.05 mm) in diameter and 2 in (50.8 mm) long.
What can I look for on a hydraulic rack and pinion that may be wearing out?
Heavy steering, play in the wheel, a clunk when turning or power steering fluid spots where you park can be signs. A shop can inspect the rack and test its pressure.
How far apart are the mounting holes on this rack and pinion?
This rack has two mounting holes 15.5 in (393.7 mm) apart, and its end-to-end length is 45 in (1143 mm). Those are the numbers to measure your old unit against.
