Turn steering-wheel input into hydraulically assisted wheel movement with the TERREPOWER (formerly BBB Industries) N101-0106, a new power steering rack and pinion built for dependability and reliability throughout the vehicle's service life. It is a direct-fit replacement for several models from Ford, Lincoln and Mercury, among them the 1985-1993 Ford Mustang, 1984-1988 Ford Thunderbird and 1984-1986 Ford LTD, listed for All engines on each application. See the "Vehicles it fits" section for the full list.
If you are replacing a 1985-1993 Ford Mustang power steering rack or the unit on another listed vehicle, this new hydraulic rack comes with its inner tie rods included.
- Type: New hydraulic power steering rack, one per application.
- Tie rods: Inner tie rods are included. Outer tie rods are not, so transfer or replace them as directed by the vehicle service information.
- Port threads: 9/16x18 pressure port and 5/8x18 return port.
- Specifications: 45.25 in end-to-end length, 0.75 in input shaft diameter, 2.25 in input shaft length, 3.063 total turns lock to lock, and 2 mounting holes.
Signs that a steering rack may need replacing include fluid leaking at the rack, heavy or uneven steering effort, and excess play in the wheel. Other steering components can cause similar symptoms, so diagnose the cause before you replace the rack. For installation, fluid fill and alignment, follow the vehicle service information.
Country of origin: China.
Frequently Asked Questions
Is this the right 1985-1993 Ford Mustang rack and pinion for my car?
It is listed for the 1985-1993 Ford Mustang with the All engine designation. The "Vehicles it fits" section shows every listed application.
Does it fit the 1984-1988 Ford Thunderbird or 1984-1986 Ford LTD?
Yes. It is listed for the 1984-1988 Ford Thunderbird and the 1984-1986 Ford LTD, All engines.
Are tie rods included with this rack and pinion assembly?
Inner tie rods are included, but outer tie rods are not. Transfer or replace the outer tie rods as directed by the vehicle service information.
What are the port thread sizes and steering specs?
The pressure port is 9/16x18 and the return port is 5/8x18. The rack is rated at 3.063 turns lock to lock, with a 0.75 in input shaft diameter and a 2.25 in input shaft length.
What does a power steering rack do?
It converts steering-wheel rotation into side-to-side motion that steers the wheels. Hydraulic pressure from the power steering system reduces the effort needed to turn the wheel.
