Front Wheel Bearing and Hub Assembly for 1996-2007 Ford Taurus & More - Timken 513100

$115.99

Timken Wheel Bearing and Hub Assembly 513100

Timken Wheel Bearing and Hub Assembly 513100 - view 2

Timken Wheel Bearing and Hub Assembly 513100 - view 3

Timken Wheel Bearing and Hub Assembly 513100 - view 4

Part number: 513100

UPC: 053893854069

Condition: New

Weight: 8.60 LBS

Item Package Quantity: 1

$115.99

Current Stock: 98

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Timken Wheel Bearing and Hub Assembly P/N:513100

$115.99

Description

Timken 513100 front wheel bearing and hub assembly for the 1996-2007 Ford Taurus and other vehicles connects the wheel to the car and lets it spin. The assembly comes preset, pre-greased and pre-sealed.

Design, materials and manufacturing process are controlled through testing
Low runout reduces noise and vibration
Seals with a reinforced outer case, ribbed rubber inner diameter, contamination exclusion system and vent holes against installation damage
Bearings with precision profiles, uniform internal geometry and enhanced surface finishes to raise load carrying capacity
ABS sensors 100% tested to monitor wheel speed for the anti-lock braking system

Quick facts

Part: Timken 513100 wheel bearing and hub assembly
Fits: 1996-2007 Ford Taurus and other vehicles
Position: Front
Condition: New

A humming or growling noise that changes with speed, or looseness at the wheel, can mean the bearing is worn. Tires and brakes can make similar noise, so before replacing anything, look the hub area over with the engine off for grease around a torn seal.

Fits

It fits the 1996-2007 Ford Taurus, the 1996-2005 Mercury Sable and the 1995-2002 Lincoln Continental. These cars take two, one for each front wheel. This listing is one assembly, and both front sides are normally replaced together.

Specifications

Fit and size

Position: Front
Quantity per vehicle: 2
Bolt circle diameter: 107.95 mm (4.250 in), 5 wheel studs
Flange bolt holes: 3
Flange diameter: 139.00 mm (5.472 in)
Flange offset: 35.90 mm (1.413 in)
Brake pilot diameter: 70.97 mm (2.794 in)
Hub pilot diameter: 85.50 mm (3.366 in)
Wheel pilot diameter: 63.23 mm (2.489 in)
Spline quantity: 26

Build and materials

Drive type: Driven
Construction: preset, pre-greased and pre-sealed
Condition: New

Interchange: 400.61002
WE60546 · BR930179

Manufacturer's description

Product specs

Vehicles it fits

Interchange numbers

This part cross-references / interchanges with the following part numbers:

WE60546, 400.61002, 513100, BR930179

Buyer's Q&A

Frequently Asked Questions

Is this Timken wheel bearing right for the 1996-2007 Ford Taurus?

Yes. Timken 513100 is a front wheel bearing and hub assembly for the 1996-2007 Ford Taurus, and it also fits the 1996-2005 Mercury Sable.

Do these Timken front wheel bearings come greased and sealed?

Yes. This assembly is preset, pre-greased and pre-sealed, and its seals have a reinforced outer case and vent holes against installation damage.

What are the bolt circle and stud count on this Timken wheel bearing and hub assembly?

Timken 513100 has a 107.95 mm (4.250 in) bolt circle with 5 wheel studs. The flange has 3 bolt holes and the hub has 26 splines.

Which noises can mean worn Timken hub bearings?

A humming or growling that changes with speed, or play at the wheel, can mean a worn hub bearing. A shop can test it, since tires and brakes can sound similar.

Are these Timken wheel hubs tested for ABS?

Yes. On Timken 513100, the ABS sensors are 100% tested to monitor wheel speed for the anti-lock braking system.