Rear Wheel Bearing and Hub Assembly for 2000-2005 Toyota Echo - Timken HA592410

$181.99
Timken Wheel Bearing and Hub Assembly HA592410
Timken Wheel Bearing and Hub Assembly HA592410 - view 2
Timken Wheel Bearing and Hub Assembly HA592410 - view 3
Timken Wheel Bearing and Hub Assembly HA592410 - view 4
Timken Wheel Bearing and Hub Assembly HA592410
Timken Wheel Bearing and Hub Assembly HA592410 - view 2
Timken Wheel Bearing and Hub Assembly HA592410 - view 3
Timken Wheel Bearing and Hub Assembly HA592410 - view 4

Vehicles this part fits
    Part number: HA592410
    UPC: 053893977263
    Condition: New
    Weight: 6.00 LBS
    Item Package Quantity: 1
    $181.99
    Adding to cart… The item has been added

    Have questions?

    Ask an Expert
    Timken Wheel Bearing and Hub Assembly P/N:HA592410
    Timken Wheel Bearing and Hub Assembly P/N:HA592410
    $181.99
    $181.99

    Timken HA592410 rear wheel bearing and hub assembly for the 2000-2005 Toyota Echo holds the rear wheel and lets it turn smoothly. This Timken wheel bearing is a non-driven hub unit.

    • Tests control the design, materials and manufacturing process for consistent performance
    • Low runout helps reduce noise and vibration and supports braking performance
    • Seals with a reinforced outer case, ribbed rubber inner diameter and contamination exclusion system
    • Bearings with precision profiles, uniform internal geometry and enhanced surface finishes for load capacity and bearing life

    Quick facts

    • Part: Timken HA592410 wheel bearing and hub assembly
    • Fits: 2000-2005 Toyota Echo
    • Position: Rear
    • Condition: New

    A humming or growling from a rear wheel that changes with speed, or vibration, can mean a worn hub bearing. Before you replace the hub, rule out tire wear and rear brake problems as the source of the noise.

    Fits

    It fits the 2000-2005 Toyota Echo, which takes two. This listing is one rear hub, and both sides are normally replaced together.

    Specifications

    Fit and size

    • Position: Rear
    • Quantity per vehicle: 2
    • Bolt circle: 100 mm (3.937 in), 4 bolt holes
    • Wheel studs: 4
    • Flange diameter: 135 mm (5.315 in)
    • Flange offset: 54.5 mm (2.146 in)
    • Hub pilot diameter: 67 mm (2.638 in)
    • Wheel pilot diameter: 54 mm (2.126 in)
    • Brake pilot diameter: 55 mm (2.165 in)

    Build and materials

    • Type: Hub unit bearing assembly
    • Drive type: Non-driven
    • Condition: New

    Installation notes

    • Comes preset, pre-greased and pre-sealed.
    • Vent holes in the seals prevent installation damage.

    Interchange: 051-6092 · 405.44008
    512210 · BR930357

    This part cross-references / interchanges with the following part numbers:

    051-6092, 405.44008, 512210, BR930357

    Frequently Asked Questions

    Is the Timken wheel bearing and hub assembly HA592410 right for the 2000-2005 Toyota Echo?

    Yes. Timken HA592410 is a rear, non-driven wheel bearing and hub assembly for the 2000-2005 Toyota Echo, which takes two.

    What are the bolt circle and pilot sizes on these Timken wheel hubs?

    This rear hub has a 4-bolt flange on a 100 mm (3.937 in) bolt circle. The hub pilot is 67 mm, the wheel pilot 54 mm and the brake pilot 55 mm.

    What are signs these Timken hub bearings are wearing out?

    Noise from a rear wheel that rises with road speed, vibration or an ABS warning light can mean a worn hub bearing. A shop can test it.

    Do I need to grease or adjust this Timken wheel bearing assembly?

    No. The unit comes preset, pre-greased and pre-sealed, and the seals have vent holes that prevent installation damage.

    Does Timken HA592410 replace 512210?

    Yes. 512210 is listed as an interchange number for the Timken HA592410 rear wheel bearing and hub assembly.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review

    Related Products

    !