TrakMotive MB-8058 front right CV axle shaft for the 2016-2019 Mercedes-Benz GLE400 and other vehicles sends drive torque to the front right wheel. Its CV joints let the wheel steer and move with the suspension while it keeps driving.
- Neoprene boots on both the inboard and outboard joints
- Male inboard joint with 37 splines and a conventional outboard joint with 30 splines
- Axle nut included, with M24x1.5 thread, 36 mm hex and stake locking
- Overall compressed length of 1014 mm (39.92 in)
Quick facts
- Part: TrakMotive MB-8058 CV axle shaft
- Fits: 2016-2019 Mercedes-Benz GLE400 and other vehicles
- Position: Front right
- Condition: New
A clicking noise in tight turns, vibration under acceleration or grease around a torn boot can mean a CV joint is wearing. Before you replace the axle, rule out a worn wheel bearing, a tire problem or a loose suspension part, since those can make similar noises. If a worn joint is the cause, this TrakMotive CV axle shaft replaces the front right side.
Fits
Vehicles it fits include the 2017-2019 Mercedes-Benz GLE43 AMG and the 2017-2019 Mercedes-Benz GLS450, alongside the 2016-2019 Mercedes-Benz GLE400. If your Mercedes-Benz is not named here, search your own year and model in the "Vehicles it fits" section. A car takes one shaft on each side of the front axle; this listing is the right side, and the left side is a separate part normally replaced at the same time.
Specifications
Fit and size
- Position: Front right
- Quantity per application: 1
- Overall compressed length: 1014 mm (39.92 in)
- Inboard joint: male, 37 splines
- Outboard joint: conventional, 30 splines
- Axle nut thread size: M24x1.5
- Axle nut hex size: 36 mm
Build and materials
- Condition: New
- Boot material: neoprene on both joints
- Axle nut locking type: stake
- ABS tone ring: not included
- Warranty: TrakMotive limited lifetime warranty
- Country of origin: China
In the box
One CV axle shaft and one axle nut. The ABS tone ring is not included.
Interchange: NCV48021 · NCV48046 · PR48021 · PR48046 · 1663301300 · 1663301501
This part cross-references / interchanges with the following part numbers:
NCV48021, NCV48046, PR48021, PR48046, 1663301300, 1663301501, MB-8058
Frequently Asked Questions
Does the TrakMotive MB-8058 fit the 2016-2019 Mercedes-Benz GLE400?
Yes. TrakMotive MB-8058 is the front right axle shaft for the 2016-2019 Mercedes-Benz GLE400, and it also fits the 2017-2019 Mercedes-Benz GLS450. Other models are in the "Vehicles it fits" section.
Does this TrakMotive CV axle come with the axle nut?
Yes. The axle nut comes with the shaft. The ABS tone ring is not included.
What size is the axle nut on the TrakMotive MB-8058?
The nut on TrakMotive MB-8058 has an M24x1.5 thread and a 36 mm hex, and it locks by staking. The shaft measures 1014 mm (39.92 in) compressed.
How many splines does this CV axle shaft have at each end?
The male inboard joint has 37 splines and the conventional outboard joint has 30. Both ends connect by spline.
Does the TrakMotive MB-8058 replace number 1663301300?
Yes. 1663301300 is a cross-reference on the interchange list for TrakMotive MB-8058, so this front right axle shaft is a listed replacement for it.
