Vision OE Power Steering Pump P/N:N712-0177A1
TerrePower
TERREPOWER N712-0116A2 power steering pump for the 2003-2007 Ford E-150 and other vehicles builds the hydraulic pressure the steering system uses for power assist. This new hydraulic pump is part of the Vision OE line.
A whine when turning, heavy steering or fluid leaking around the pump can mean the pump is worn. A slipping serpentine belt or a leaking hose can produce similar signs, so find the source before you replace the pump.
Alongside the 2003-2007 Ford E-150, this power steering pump is a direct-fit replacement for the 2003-2007 Ford E-250 and the 1999-2007 Ford E-350 Super Duty. The 2003-2007 Ford E-250 takes one pump. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One power steering pump with its pulley and an installation kit. The reservoir, reservoir cap, filter and sensor are not included.
Interchange: 1C2Z-3A674-AA · 1C2Z-3A674-BA · 2C2Z-3A674-BA · 2C2Z-3A674-CA · 2C2Z-3A674-EA · 5C2Z-3A674-A · F7UZ-3A674-CA · F8UZ-3A674-AC
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the TERREPOWER N712-0116A2 power steering pump fit the 2003-2007 Ford E-250?
Yes. TERREPOWER N712-0116A2 fits the 2003-2007 Ford E-250, and that vehicle takes one pump. Open the "Vehicles it fits" section to check other models and engines.
Does this TERREPOWER power steering pump come with the pulley and reservoir?
TERREPOWER N712-0116A2 comes with its pulley and an installation kit. The reservoir, reservoir cap, filter and sensor are not included.
What size is the outlet on this power steering pump?
The outlet is threaded M16X1.50 with a 16 mm diameter. The inlet is a pipe attachment with a 0.711 in diameter.
Is a whine when turning a sign this power steering pump is wearing out?
It can be, as can fluid leaking around the pump or heavy steering; a leak can be looked for with the engine off and cool, and a shop can test the pump itself.
Is the pulley on this power steering pump press-on, and which belt does it take?
Yes, the pulley is press-on and made for a serpentine belt. The pump housing is cast iron.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.