Walker Products 350-341033 oxygen sensor for the 2018-2024 Chevrolet Camaro V6 3.6L and other vehicles measures the oxygen in the exhaust gas. This Walker Products oxygen sensor is a direct fit, 4-wire narrow-band unit that gives the engine computer the diagnostic feedback it needs.
- Measures exhaust oxygen to help fine-tune the air-fuel ratio and support fuel economy
- Electrodes made of a gas-permeable platinum layer
- Monitors exhaust gases and helps reduce pollutants
- Coating guards the electrode surfaces against contamination and erosion from combustion residue and particulates
- Made for its specific application and fitment position
Quick facts
- Part: Walker Products 350-341033 oxygen sensor
- Fits: 2018-2024 Chevrolet Camaro V6 3.6L and other vehicles
- Position: Downstream, downstream left, downstream right
- Condition: New
A rough-running engine, higher fuel use, more exhaust emissions or a lit check engine light can mean this sensor is worn, though a damaged wiring harness or connector can be behind the same signs, so look those over with the engine off and cool. Each downstream position takes one sensor, and this listing is one.
Fits
The 2018-2024 Chevrolet Camaro V6 3.6L, the 2020-2024 Cadillac CT5 V6 3.0L and the 2022-2024 Cadillac CT4 V6 3.6L are vehicles this sensor fits, and it fits more models too. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: downstream, downstream left, downstream right
- Quantity per vehicle: 1
- Thread size: M18 - 1.5
- Number of wires: 4
Build and materials
- Type: narrow-band, direct fit
- Condition: New
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is Walker Products 350-341033 the right oxygen sensor for a 2018-2024 Chevrolet Camaro V6 3.6L?
Yes. Walker Products 350-341033 fits the 2018-2024 Chevrolet Camaro V6 3.6L, with one sensor per position. The "Vehicles it fits" section covers the other models.
What type of oxygen sensor is the Walker Products 350-341033?
Walker Products 350-341033 is a narrow-band, direct fit sensor with 4 wires and an M18 - 1.5 thread.
Is this oxygen sensor an upstream or downstream sensor?
This oxygen sensor is a downstream unit, sold for the downstream, downstream left or downstream right position. Each position takes one sensor.
What are the signs this downstream oxygen sensor is wearing out?
A rough-running engine, higher fuel use, more exhaust emissions or a check engine light can be signs. Newer vehicles store fault codes, which a shop can read.
What does the coating on the electrodes of this oxygen sensor do?
On the Walker Products 350-341033, the coating protects the electrode surfaces from contamination and erosion by combustion residue and particulates in the exhaust gases.
