Direct Injection High Pressure Fuel Pump for 2017-2020 Ford F-150 & More - Bosch 66849

Be the first to review this product
$275.99
MPN: 66849
UPC: 731413594083
Item Package Quantity: 1
Adding to cart… The item has been added

Have questions?

Bosch Direct Injection High Pressure Fuel Pump P/N:66849
Bosch Direct Injection High Pressure Fuel Pump P/N:66849
$275.99

Bosch 66849 direct injection high pressure fuel pump for the 2017-2020 Ford F-150 V6 3.5L and other vehicles raises fuel pressure for a gasoline direct injection system. Bosch makes it in-house, never sourced or reverse-engineered, as an OE direct-fit replacement.

  • Designed to operate under extreme temperatures and low fuel conditions
  • Every pump is function tested at the end of the line before it leaves the manufacturing facility
  • Integrated pressure limiter valve
  • Integrated pressure damper capable of variable feed pressure
  • Compact, light-weight design
  • On-demand quantity control to minimize fuel consumption

Quick facts

  • Part: Bosch 66849 direct injection high pressure fuel pump
  • Fits: 2017-2020 Ford F-150 V6 3.5L and other vehicles
  • Material: Steel
  • Condition: New

A weak pump can show up as hard starting, a rough idle or a loss of power under load. Other fuel-system parts, such as a filter, a sensor or an injector, can produce those symptoms too, so find the cause before replacing the pump. With the engine off and cool, you can look over the pump and fuel lines for wetness or a fuel smell; pressure tests are for a shop.

Fits

This pump is listed for a wide range of Ford and Lincoln models, including the 2018-2021 Ford Expedition V6 3.5L and the 2017-2022 Ford GT V6 3.5L. Driving something else? Look up your own year, model and engine on the Buyer's Guide tab before you order.

Specifications

Fit and size

  • Quantity per vehicle: 1
  • Outside diameter: 16 mm
  • Inside diameter: 6 mm
  • Inlet size: 9.5 mm, quick connect
  • Outlet size: 14 mm
  • Outlet thread: M16 x 1.5
  • Housing width: 51 mm

Build and materials

  • Type: mechanical piston pump
  • Material: Steel
  • Housing material: Metal
  • Seal: o-ring, synthetic or NBR rubber
  • Fuel type: Gas
  • Condition: New

In the box

One direct injection high pressure fuel pump with an o-ring and a gasket or seal. The lock ring, wiring harness, strainer and suction pipe are not included. This listing is one pump, which is the quantity per vehicle the fitment gives.

Installation notes

  • Designed for simple plug-and-play installation.

Interchange: HL3Z9350B

This part cross-references / interchanges with the following part numbers:

HL3Z9350B

Frequently Asked Questions

Is the Bosch 66849 fuel pump right for the 2017-2020 Ford F-150 V6 3.5L?

Yes. Bosch 66849 is listed for the 2017-2020 Ford F-150 V6 3.5L and the 2018-2021 Ford Expedition V6 3.5L. Other vehicles are covered on the Buyer's Guide tab.

Does this high pressure fuel pump come with an o-ring or a lock ring?

It includes an o-ring and a gasket or seal, but no lock ring. The wiring harness, strainer and suction pipe are also not included.

What size are the outlet and thread on this direct injection high pressure fuel pump?

The outlet is 14 mm with an M16 x 1.5 thread. The inlet is 9.5 mm with a quick-connect fitting, and the outside diameter is 16 mm.

What is the Bosch 66849 pump made of, and what is built into it?

Bosch 66849 is made of steel. It has an integrated pressure limiter valve and an integrated pressure damper capable of variable feed pressure.

Is this high pressure fuel pump plug-and-play to install?

Yes. Bosch designed the 66849 for simple plug-and-play installation. Gasoline direct injection fuel systems run at high pressure, so a shop can handle the job if you are unsure.