Bosch BE432 rear brake pad for the 1989-1992 Toyota Cressida, a ceramic pad whose friction material the caliper clamps against the rotor to slow the car. This Bosch brake pad comes as a set of four pads, also called a disc brake pad set.
- Bosch Blue line, made for everyday drivers and put through the same testing and engineering process as Bosch's premium braking line.
- Platform-specific NAO-Ceramic friction material formulations.
- Pre-attached multi-layer shims bond rubber to steel for lower noise, added strength and corrosion resistance.
- A coating prevents rust and corrosion and adds to pad life.
- Synthetic lubricant is included to reduce resistance at sliding contact points.
Squealing, grinding or a longer stopping distance can mean the pads are worn. A sticking caliper or a worn rotor can be behind these signs too, so find the cause before you buy pads.
This brake pad is a direct-fit replacement for the 1989-1992 Toyota Cressida, which takes one set.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 1
- Pads in the set: 4
- Friction material thickness: 14.4 mm (inner and outer pads)
Build and materials
- Friction material: Ceramic (NAO-Ceramic)
- Friction material attachment: Bonded
- Shims: Multi-layer, attached
- Grade: Standard replacement
- Condition: New
- Country of origin: Mexico
In the box
Four pads with shims attached, plus synthetic brake lubricant. Mounting hardware, abutment clips and a pad wear sensor are not included, so plan on new hardware and clips rather than reusing the old ones.
Interchange / FMSI:
FMSI: D432
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Does the Bosch BE432 rear brake pad fit the 1989-1992 Toyota Cressida?
Yes. Bosch BE432 is a direct-fit replacement for the 1989-1992 Toyota Cressida, and it goes on the rear brakes.
What comes with the Bosch BE432 brake pad set?
The Bosch BE432 comes with four pads that have shims attached, plus synthetic brake lubricant. Mounting hardware, abutment clips and a pad wear sensor are not included.
What friction material do these Bosch ceramic brake pads use?
This rear pad uses a ceramic friction material in a NAO-Ceramic formula, bonded to the pad. The friction material is 14.4 mm thick on the inner and outer pads.
How can I tell if my Bosch Blue brake pads are worn out?
A grinding noise when you brake or the car pulling to one side can be signs. A shop can measure the remaining friction material against the 14.4 mm a new pad has.
Do Bosch Blue disc brake pads like the BE432 have noise-reducing shims?
Yes. Bosch BE432 has pre-attached multi-layer shims that bond rubber to steel for lower noise, added strength and corrosion resistance.
