Bosch BE611H front brake pad for the 1992-2001 Toyota 4Runner and other vehicles presses against the rotor to slow the vehicle. This disc brake pad set is one of the Bosch brake pads supplied with shims, hardware and lubricant.
- Ceramic friction material, bonded to the backing plate, for quiet and clean performance
- Bosch Blue line, made for everyday driving
- Pre-attached multi-layer shims bond rubber to steel for lower noise, added strength and corrosion resistance
- Product coating that prevents rust and corrosion on the brake pad
- Stainless hardware, as applicable, for smooth operation and reduced noise
- Synthetic lubricant included to reduce resistance at sliding contact points
Quick facts
- Part: Bosch BE611H brake pad
- Also called: disc brake pad set
- Fits: 1992-2001 Toyota 4Runner and other vehicles
- Position: Front
- Material: Ceramic friction material
- Condition: New
Squealing, longer stops or pulling to one side can mean worn pads. Before you replace these brake pads, rule out a sticking caliper or a damaged rotor, since the wear you see may start there.
Fits
This set fits the 1992-2001 Toyota 4Runner and the 1993-1998 Toyota T100, and each takes one set of four pads on the front axle.
Specifications
Fit and size
- Position: Front
- Pads per set: 4
- Quantity per vehicle: 1 set
- Friction material thickness: 15 mm (inner and outer pads)
- Slotted: Yes
Build and materials
- Friction material: Ceramic
- Friction material attachment: Bonded
- Grade: Standard replacement
- Condition: New
- Country of origin: Mexico
In the box
Four brake pads with pad shims, abutment clips, mounting hardware, a pad wear sensor and brake lubricant.
Interchange / FMSI:
FMSI: D611
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Are these 1992-2001 Toyota 4Runner brake pads for the front or the rear?
Front. Bosch BE611H is a front brake pad set for the 1992-2001 Toyota 4Runner and the 1993-1998 Toyota T100.
Do these Bosch car brake pads come with a wear sensor and hardware?
Yes. The Bosch BE611H set includes a pad wear sensor, shims, abutment clips, mounting hardware and brake lubricant.
Are these Bosch ceramic brake pads bonded or riveted?
Bonded. The ceramic friction material is bonded to the backing plate, and the pads are slotted.
What are Bosch Blue brake pads made for?
They are made for everyday drivers, with friction formulations aimed at quiet, clean performance.
What signs can show these front brake pads are wearing out?
Squealing or grinding, longer stops or pulling to one side can mean worn pads. The friction material on a new set is 15 mm thick, so a shop can compare what is left.
