Bosch Disc Brake Pad Set P/N:BE459H
Bosch BSP1194 rear brake pad for the 2007-2014 Chevrolet Tahoe and other vehicles presses against the rotor to slow and stop the rear wheels. Sold as a disc brake pad set, these Bosch ceramic brake pads use a friction formulation made for each specific vehicle platform.
Squealing or grinding from the rear brakes, or stops that take longer than they used to, can mean the pads are worn. Before you replace them, have a shop rule out a sticking caliper or a damaged rotor, since either one can also cause noise and uneven pad wear.
The vehicles it fits include the 2007-2013 Chevrolet Silverado 1500 and the 2007-2013 GMC Sierra 1500. A 2007-2014 Chevy Tahoe brake pad replacement at the rear calls for one set, which covers both rear wheels, and the same goes for the other vehicles. If you drive another Cadillac, Chevrolet or GMC model, find its year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One set of rear brake pads and a synthetic lubricant for the sliding contact points.
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Are these Chevy Tahoe brake pads for the front or rear of a 2007-2014 model?
They go on the rear. Bosch BSP1194 is a rear brake pad for the 2007-2014 Chevrolet Tahoe, and you can look up other models in the "Vehicles it fits" section.
Will these work as GMC Sierra 1500 brake pads on a 2007-2013 truck?
Yes. Bosch BSP1194 fits the rear brakes of the 2007-2013 GMC Sierra 1500, and it fits the 2007-2013 Chevrolet Silverado 1500 as well.
Do these Bosch brake pads come with lubricant?
Yes. These rear brake pads come with a synthetic lubricant that helps reduce resistance on the sliding contact points.
What can squealing or grinding from these rear brake pads mean?
Squealing or grinding, along with longer stops, can mean these rear brake pads are worn. Have them checked or replaced promptly rather than driving on them.
How does the shim on the Bosch BSP1194 cut brake noise?
The Bosch BSP1194 uses a 5-Layer Steel & Rubber Shim to silence noise and vibration, and its PTFE & Rubber Coated Hardware helps keep the pads from binding to the caliper.
Published by the manufacturer of this part. Links open in a new tab.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.