A1 CARDONE 19-3303 rear right brake caliper for the 2005-2006 Hyundai Elantra and other vehicles clamps the brake pads against the rotor to slow the wheel. This remanufactured A1 CARDONE brake caliper is a floating, single-piston unit that is 100% pressure-tested.
- New high-temperature EPDM rubber seals replace the old ones
- Steel piston, resistant to cracking and pitting
- Special rust inhibitor treatment on the caliper
- Hardware kit with new abutment clips, anti-rattle spring and dust boots
Quick facts
- Part: A1 CARDONE 19-3303 brake caliper
- Also called: disc brake caliper
- Fits: 2005-2006 Hyundai Elantra and other vehicles
- Position: Rear right
- Material: Cast iron
- Condition: Remanufactured
A disc brake caliper that sticks or leaks can show up as a pull to one side when braking, fluid around the caliper or a brake that drags. A pull alone does not prove the caliper is the problem; a restricted brake hose is another common cause.
Fits
Among the vehicles it fits are the 2005-2006 Hyundai Elantra, the 2005-2009 Kia Spectra and the 2005-2009 Kia SPECTRA5. For a rear right 2005-2006 Hyundai Elantra brake caliper replacement, this is the one. If your car is not named here, look it up in the "Vehicles it fits" section. Plan to replace both rear calipers together; this listing is a single rear right caliper.
Specifications
Fit and size
- Position: Rear right
- Quantity per vehicle: 1 for the rear right side
- Piston quantity: 1
- Piston diameter: 33.8836 mm (1.334 in)
- Mounting hole diameter: 7.8709 mm (0.31 in)
- Inlet port size: 10.00366 mm (0.394 in)
- Inlet thread: M10x1.0, inverted flare fitting
- Bleeder thread: M10x1.0
Build and materials
- Type: Floating, unloaded
- Condition: Remanufactured
- Casting material: Cast iron
- Piston material: Steel
- Finish: Oil emulsion, rust-resistant coating
- Casting number: BC140018
- Country of origin: Mexico
In the box
One remanufactured rear right caliper, a hardware kit and an instruction sheet. This listing holds one caliper, and the rear right takes one; the rear left is a separate part. Pads, the bracket, mounting bolts and the bleeder screw cap are not included, so plan on new mounting bolts.
Installation notes
- The instruction sheet in the box covers the steps.
- A plastic cap plug protects every brake port thread until installation.
- A new bleeder screw gives a positive seal when bleeding the brakes.
Interchange: 583112CA00 · 583112CA20 · 583112CA31 · 583112DA20 · 583112DA30 · 583112DA31 · 582302F300
This part cross-references / interchanges with the following part numbers:
583112CA00, 583112CA20, 583112CA31, 583112DA20, 583112DA30, 583112DA31, 582302F300
Frequently Asked Questions
Is 19-3303 the right 2005-2006 Hyundai Elantra brake caliper for the rear right side?
Yes. A1 CARDONE 19-3303 is a rear right caliper for the 2005-2006 Hyundai Elantra; for another car, look it up in the "Vehicles it fits" section.
Is this also a 2005-2009 Kia Spectra brake caliper for the rear right?
Yes. The rear right 19-3303 also fits the 2005-2009 Kia Spectra, and the rear left side of the car needs its own caliper.
Does the 19-3303 caliper come with pads and a bracket?
No. A1 CARDONE 19-3303 is an unloaded caliper with a hardware kit and instruction sheet, and pads, the bracket, mounting bolts and the bleeder screw cap are not included.
How big is the piston on this rear right caliper?
This caliper has one steel piston, 33.8836 mm (1.334 in) in diameter, in a floating design.
Is every A1 CARDONE caliper pressure-tested?
Yes. These remanufactured calipers are 100% pressure-tested, and the rubber seals are replaced with new high-temperature EPDM rubber.
