A1 CARDONE 19-B3298 rear right brake caliper for the 2006-2015 Honda Civic and other vehicles squeezes the pads against the rotor to slow the wheel. Also called a disc brake caliper, this remanufactured floating caliper has a single steel piston and arrives unloaded, with its bracket and without pads.
- Remanufactured with brand-new components and 100% pressure-tested
- Steel piston resists cracking and pitting and handles heavy loads
- Rubber seals are replaced with new high-temperature EPDM rubber
- Treated with a specially formulated rust inhibitor
- Plastic cap plug on every brake port thread
Quick facts
- Part: A1 CARDONE 19-B3298 brake caliper
- Also called: disc brake caliper
- Fits: 2006-2015 Honda Civic and other vehicles
- Position: Rear right
- Material: Cast iron
- Condition: Remanufactured
A rear brake that drags, a car that pulls to one side or pads that wear unevenly can mean this caliper is worn or sticking, though a restricted brake hose or binding slide pins can be behind the same signs, so find the cause first. Plan on doing both rear calipers as a pair; this listing covers only the rear right.
Fits
It is a rear brake caliper for the 2006-2015 Honda Civic, and it also fits the 2013-2018 Acura ILX and the 2006-2011 Acura CSX.
Specifications
Fit and size
- Position: rear right
- Quantity per vehicle: 1 for this side
- Piston diameter: 33.8836 mm (1.334 in)
- Mounting hole diameter: 10.00366 mm (0.394 in)
- Inlet port size: 10.00366 mm (0.394 in), inverted flare, M10x1.0 thread
- Mounting hole thread: M10x1.25
- Bleeder thread: M10x1.25
Build and materials
- Condition: remanufactured, unloaded
- Caliper type: floating, 1 piston
- Piston material: steel
- Casting material: cast iron
- Finish: oil emulsion, with rust-resistant coating
- Country of origin: Mexico
In the box
One caliper with its bracket, a hardware kit (abutment clips, anti-rattle spring, bleeder screw and dust boots) and an instruction sheet. This listing holds one caliper; the rear right takes one, and the rear left is a separate part. Pads, a mounting bolt and a bleeder screw cap are not included, so plan on new mounting bolts.
Installation notes
- An instruction sheet comes with the caliper for the steps.
- Silicone grease is used on floating caliper mounting pins.
Interchange: 43018SNAA10 · 43018TR3A00 · 43018TR3A01 · 43018TR3A02 · 43018TR0A00
This part cross-references / interchanges with the following part numbers:
43018SNAA10, 43018TR3A00, 43018TR3A01, 43018TR3A02, 43018TR0A00
Frequently Asked Questions
Is this a caliper for the 2006-2015 Honda Civic?
Yes. A1 CARDONE 19-B3298 is a rear right brake caliper listed for the 2006-2015 Honda Civic.
Which side does this rear caliper go on for the 2006-2015 Honda Civic?
The rear right wheel. The rear left takes a separate caliper, so a pair on the 2006-2015 Honda Civic needs one of each.
What comes with CARDONE 19-B3298 besides the caliper?
The bracket, a hardware kit (abutment clips, anti-rattle spring, bleeder screw, dust boots) and an instruction sheet. Pads and a mounting bolt are not included.
What piston size and brake line thread does this rear right caliper use?
It has a single steel piston, 33.8836 mm (1.334 in) across. The inlet is an inverted flare with an M10x1.0 thread.
Which brake fluid should I use after installing this caliper?
Use the fluid the vehicle maker specifies; the type is stamped on the master cylinder reservoir lid. Always use new fluid from a sealed container.
