Dayco Accessory Drive Belt P/N:17585
Dayco 15565 accessory drive belt for the 1965-1968 Chevrolet Impala V8 6.5L, the 1966-1968 Impala V8 7.0L and other vehicles transfers engine power to the belt-driven accessories.
A worn belt can show cracks, fraying or a glazed surface you can see with the engine off, and a squeal can be another sign. Noise alone does not prove the belt is at fault, since a worn tensioner or pulley can squeal too.
The vehicles it fits include the 1965-1968 Chevrolet Impala V8 6.5L, the 1966-1968 Impala V8 7.0L, the 1979 Chevrolet Malibu V6 3.8L and the 1963 Chevrolet Suburban V8 4.6L, with a quantity of one belt per vehicle.
Fit and size
Build and materials
Does the Dayco 15565 accessory drive belt fit the 1979 Chevrolet Malibu V6 3.8L?
Yes. Dayco 15565 fits the 1979 Chevrolet Malibu V6 3.8L, and the quantity is one. If your car is not named on this page, look up its year and engine in the "Vehicles it fits" section.
Is the Dayco 15565 belt a cog belt or a banded belt?
Dayco 15565 is a bottom cog belt, not a banded belt. It has a 36-degree angle and is made from a synthetic rubber compound.
What temperature range does this accessory drive belt operate in?
The operating range is -37.2 C to 79.4 C (-35 F to 175 F).
Which SAE standards are listed for this accessory drive belt?
This belt is listed to SAE J636 and SAE J637.
Can I check this belt for wear myself?
Yes. With the engine off and cool, look for cracks, fraying or a glossy, glazed surface. Squealing in normal driving is another reason to have it looked at.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.