Delphi FE0039 electric fuel pump for the 1985-1989 Chevrolet Camaro V6 2.8L and other vehicles moves fuel from inside the tank to the engine. This in-tank Delphi electric fuel pump is built to Delphi's OE standards.
- Designed to operate under extreme temperatures with quick engine starts
- Pump design aimed at improved performance and durability
- Designed to restore fast pressure performance and system integrity using less energy
- Each pump is validated and tested
- Lower amperage draw puts less load on the vehicle's electrical system
Quick facts
- Part: Delphi FE0039 electric fuel pump
- Fits: 1985-1989 Chevrolet Camaro V6 2.8L and other vehicles
- Position: In-tank
- Condition: New
Hard starting, stalling or a drop in power can mean the pump is worn, though a clogged fuel filter or a weak fuel pump relay may be the source instead. A shop can pressure-test the fuel system to tell them apart.
Fits
The 1985-1989 Chevrolet Camaro V6 2.8L, the 1996 Chevrolet Lumina APV V6 3.4L and the 1996 Oldsmobile Silhouette V6 3.4L all fit this pump, as do many other vehicles, and a car needs one pump. If your car isn't named here, look it up by year and engine in the "Vehicles it fits" section.
Specifications
- Position: In-tank
- Quantity per vehicle: 1
- Condition: New
In the box
One electric fuel pump, two hose clamps, a hose piece, an isolator, two seals, terminal hardware, a 4-wire pump harness and connector assembly, and an instruction sheet.
Installation notes
- An instruction sheet comes with the pump.
- Check and clean the fuel tank during the repair.
- Replace the fuel strainer whenever the fuel pump is replaced.
Frequently Asked Questions
Does the Delphi FE0039 fit a 1996 Chevrolet Lumina APV V6 3.4L?
Yes. Delphi FE0039 fits the 1996 Chevrolet Lumina APV V6 3.4L, and that vehicle needs one pump.
Does the FE0039 come with a wiring harness and hose clamps?
Yes. Delphi FE0039 comes with two hose clamps, a hose piece, an isolator, two seals, terminal hardware, a 4-wire pump harness and connector assembly, and an instruction sheet.
Is the Delphi FE0039 an in-tank fuel pump?
Yes. Delphi FE0039 is an in-tank electric fuel pump, so it mounts inside the fuel tank.
Does this electric fuel pump work in extreme temperatures?
Yes. This pump is designed to operate under extreme temperatures with quick engine starts, and its lower amperage draw puts less load on the vehicle's electrical system.
What else should be done when replacing an in-tank fuel pump like this one?
The fuel tank should be checked and cleaned, and the fuel strainer should be replaced during the same repair. An instruction sheet comes with the pump.
