Delphi FP10495 fuel injection pressure regulator for the 1990-1994 Plymouth Laser 4-cylinder 2.0L and other vehicles holds fuel pressure in the system at a controlled level. The Delphi fuel injection pressure regulator is tested with OE engineering, and its internal valves, diaphragms and springs are precisely manufactured.
- Nitrile™ diaphragms resist high-ethanol fuels
- Two regulator designs help meet emissions standards
- Precisely made valves, diaphragms and springs for performance under all engine operating conditions
- Quiet operation with no audible regulator noise
- Diaphragm materials made for longer life, improved durability and compatibility with a wide range of fuels
- Consistent, predictable fuel pressure throughout the system's range of control
Quick facts
- Part: Delphi FP10495 fuel injection pressure regulator
- Fits: 1990-1994 Plymouth Laser 4-cylinder 2.0L and other vehicles
- Condition: New
When fuel pressure drifts, you may notice hard starting, a rough idle or poor fuel economy. A weak fuel pump can also leave pressure low, so these symptoms by themselves do not prove the regulator is at fault.
Fits
It also fits the 1990-1994 Eagle Talon 4-cylinder 2.0L and the 1990-1994 Mitsubishi Eclipse 4-cylinder 2.0L, as well as other vehicles.
Specifications
- Quantity per vehicle: 1
- Diaphragm: Nitrile™
- Condition: New
In the box
This listing holds one fuel injection pressure regulator, and the engine takes one.
Interchange: 800-295
23015 · MD124647 · PR183
This part cross-references / interchanges with the following part numbers:
23015, MD124647, 800-295, PR183
Frequently Asked Questions
Is the Delphi FP10495 regulator right for the 1990-1994 Eagle Talon 4-cylinder 2.0L?
Yes. The Delphi FP10495 fits the 1990-1994 Eagle Talon 4-cylinder 2.0L and many other vehicles. If your car is not named here, look it up in the "Vehicles it fits" section.
Will the diaphragm in this regulator handle high-ethanol fuel?
Yes. The Delphi FP10495 has Nitrile™ diaphragms that resist high-ethanol fuels, and its diaphragm materials are made for compatibility with a wide range of fuels.
Is this pressure regulator noisy when it runs?
No. The regulator is made for quiet operation with no audible regulator noise, using precisely manufactured valves, diaphragms and springs.
How do I know if the fuel injection pressure regulator on my engine is going bad?
Hard starting, a rough idle or a fuel odor can be signs. Checking fuel pressure means working on the fuel system, so have a shop test it.
Does PR183 interchange with this Delphi regulator?
Yes. PR183 is one of the numbers this Delphi FP10495 regulator replaces.
