Delphi Fuel Pump Hanger Assembly P/N:HP10049
Delphi HP10097 fuel pump and sender assembly for the 1997 Ford Crown Victoria V8 4.6L and other vehicles moves fuel from the tank to the engine and carries the float that reads the fuel level. It is also sold as a fuel pump hanger assembly.
Hard starting, stalling or a fuel gauge that reads wrong can mean the pump or float in this assembly is failing. Before you replace the assembly, rule out a clogged fuel filter, a blown fuse or a failed relay, since each can produce some of the same symptoms.
This is a direct-fit replacement fuel pump for the 1997 Lincoln Town Car V8 4.6L, the 1997 Ford Crown Victoria V8 4.6L and the 1997 Mercury Grand Marquis V8 4.6L.
Fit and size
Build and materials
One fuel pump and sender assembly with float arm, six bolts, six washers, two retainer clips and an instruction sheet. This listing is a single assembly, and the car takes one.
Interchange: 951-0008 · 953-4089 · F7AU 9H307-AE · F7AZ 9H307-AE · PFS-447
4011143 · E2222S · E2272S · E2471 · DHP10097 · 69131 · P74172 · P74856S · AFS0111S · AFS0887P · RE0111S · RE0887P · C0063H · A27078 · A30211 · E16006 · SP1113 · SP2222H · USEP2163H · USEP2222S
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the right fuel pump for the 1997 Ford Crown Victoria V8 4.6L?
Yes. Delphi HP10097 fits the 1997 Ford Crown Victoria V8 4.6L, and that car takes one assembly.
Will this work as a fuel pump for the 1997 Mercury Grand Marquis V8 4.6L?
Yes. This fuel pump and sender assembly fits the 1997 Mercury Grand Marquis V8 4.6L, and that car takes one.
Does this Delphi fuel pump come with bolts and retainer clips?
Yes. Delphi HP10097 comes with the float arm, six bolts, six washers, two retainer clips and an instruction sheet.
Is this Delphi pump built for extreme temperatures?
Yes. The pump is designed to operate under extreme temperatures with quick engine starts, and its lower amperage draw puts less load on the electrical system.
Will the float on this assembly give a correct fuel gauge reading?
Empty float height and float retention match OE specifications, which is intended to give a correct gas gauge reading.
No reviews yet — be the first to review this product.
Write a ReviewWARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.