Delphi HP10158 fuel pump hanger for the 1985-1986 Ford F-150 V8 5.0L and other vehicles mounts in the fuel tank and holds the float arm and the metal fuel tubes. The fuel pump hanger assembly comes with that float arm, which reports the tank level to the gas gauge.
- Designed to operate under extreme temperatures with quick engine starts
- Metal tubes routed so they never contact the tank, which removes noise and vibration during vehicle operation
- Empty float height and float retention set for a correct gas gauge reading
- Lower amperage draw puts less load on the vehicle's electrical system
- Validated and tested for its application
Quick facts
- Part: Delphi HP10158 fuel pump hanger
- Also called: fuel pump hanger assembly
- Fits: 1985-1986 Ford F-150 V8 5.0L and other vehicles
- Condition: New
Hard starting, stalling or a gas gauge that reads wrong can mean the hanger needs replacing, if the hanger is the cause. A clogged fuel filter can also make an engine hard to start, so rule that out first.
Fits
This hanger is a direct-fit replacement for the 1985-1986 Ford F-150 V8 5.0L and the 1985-1986 Ford F-250 V8 5.0L. Each truck takes one.
Specifications
Fit and size
- Engine: V8 5.0L
- Quantity per vehicle: 1
Build and materials
- Type: hanger assembly with float arm
- Condition: New
In the box
One fuel pump hanger with float arm, seal, lock ring and instruction sheet.
Installation notes
- Check and clean the fuel tank before installing the hanger.
- The instruction sheet in the package gives the steps.
Interchange: 951-3000 · E5TZ 9H307-B · E5TZ 9H307-BA · PFS-132
4011026 · 4011062 · 4017048 · E2093S · E2485 · DHP10158 · 67020 · P74067 · P74535S · C0016H · A27051 · E16020 · FG114A · FG33B · FG34C · SP1156 · SP383H · USEP2093S
This part cross-references / interchanges with the following part numbers:
4011026, 4011062, 4017048, E2093S, E2485, DHP10158, 67020, P74067, P74535S, 951-3000, E5TZ 9H307-B, E5TZ 9H307-BA, PFS-132, C0016H, A27051, E16020, FG114A, FG33B, FG34C, SP1156, SP383H, USEP2093S
Frequently Asked Questions
Does the Delphi HP10158 fuel pump hanger fit a 1985-1986 Ford F-250 V8 5.0L?
Yes. Delphi HP10158 fits the 1985-1986 Ford F-250 V8 5.0L, and the 1985-1986 Ford F-150 V8 5.0L takes it as well.
Does this fuel pump hanger come with a seal and lock ring?
Yes. The package holds the hanger with its float arm, a seal, a lock ring and an instruction sheet.
Do the metal tubes on this hanger rub against the fuel tank?
No. The metal tubes are routed so they do not touch the tank at any point, which removes noise and vibration while the vehicle is running.
Should I clean the fuel tank before putting in this hanger?
Yes. Check and clean the fuel tank before installing the hanger, and follow the instruction sheet in the package for the steps.
Does Delphi HP10158 replace Ford E5TZ 9H307-B?
Yes. E5TZ 9H307-B is one of the numbers listed on the Interchange line for this Delphi HP10158 fuel pump hanger.
